Fabric Change Tab - HP StorageWorks 8B - FC Entry Switch User Manual

4
File Menu
Move Status
OK
Cancel
Setting ISL Status Parameters
To set ISL status levels to be reported in ISL checking:
1. Select File > Options.
The Options window appears.
2. Select the ISL Status tab.
3. Click the Yellow or Red radio buttons to select the desired color to appear when Add, Remove,
or Move events occur (Fabric and switch events will appear in the Fabric Events window).
4. Select OK to apply the settings.
Select Cancel to close the window without saving changes.

Fabric Change Tab

Use the Fabric Change tab in the File > Options menu to enable or disable automatic Fabric
checking.
The Fabric Checking tab is shown in
4-10
Select Yellow or Red, depending on which color you want to
appear when a Move event occurs.
A Move event occurs when one end of an ISL is moved from one
port to another, but is still connecting the same switches and one
end of the connection has not moved.
Select to save ISL status parameters.
Select to exit without saving changes.
or
Figure 4-7.
Fabric Manager User's Guide