Table of Contents
Advertisement
Configuring Fabric Parameters
Perform this procedure to configure the fabric operating parameters, including
resource allocation time out value (R_A_TOV), E_D_TOV, product priority, and
interop mode. The product must be set offline. To configure parameters:
1. If product is online, set the product offline as follows:
2. Choose Configure from the navigation panel.
3. Click the Switch or Director tab (as appropriate), then click the Fabric
Figure 8: Fabric Parameters tab view
Embedded Web Server User Guide
a. Choose Operations from the navigation panel. The Operations page
displays.
b. Click the Online State tab, then click Set Offline. The following message
displays: Your operations changes have been
successfully activated.
Parameters tab. The Fabric Parameters tab view displays
a. At the BB_Credit field, type a value between 1 and 60. (This field is not
available for the Edge Switch 2/24.) Configure the product to support
buffer-to-buffer credit (BB_Credit) from 1 through 60. This is the value
used for all ports, except those configured for extended distance buffering
(10-100 km). The default value is 16. For a description of the
buffer-to-buffer credit, refer to industry specification, Fibre Channel
Physical and Signaling Interface.
Configuring the Product
(Figure
8).
35
Advertisement
Table of Contents
