Set Time; Fabric Checking - HP StorageWorks 8B - FC Entry Switch User Manual

A check mark should appear, showing that ISL checking is enabled and the node icon will
change.
When ISL checking is turned on, the following changes will take place:
•
•
For more information, refer to the
page 4-8.
Note:
Using Restamp
To restamp the fabric topology, and have the most current topology information noted in Fabric
Events, use the Restamp option. This option is only available when ISL Checking has already been
enabled.
1. See Enabling ISL Checking and the following instructions.
2. Select Actions > ISL.
3. Select Restamp.
A snapshot is taken of the fabric
4. Select Actions > Fabric Events.
View the latest changes within the fabric in the top of the Fabric Events window.

Set Time

Use the Set Time option set and change the time on a fabric or an individual switch.
The Set Time window is shown in
Figure 6-10 Set Time Window

Fabric Checking

Use the Fabric Checking option of the Actions menu to determine what changes or updates appear
in the Fabric View.
Fabric Manager User's Guide
If an event occurs, the Status Legend color will change to represent the appropriate Event.
Any events will be shown in the Fabric Events window.
San Elements Tab Icons
To disable ISL checking, repeat steps 1 - 3 to remove the check mark.
Figure
on page 3-7
6-10.
6
Actions Menu
and the ISL Status Tab on
6-15