9
Tool Bar
7.
Use the Browse button to select a firmware file from the local host, or if the firmware is
located on the remote host, then type the full path to the firmware on the remote host.
8.
Select download protocol (RSHD or FTP).
If FTP is the chosen protocol, enter FTP password.
9.
Choose the Download button to begin firmware download.
Choose the Close button to close the window without saving changes.
Sequenced Reboot Icon
The Sequenced Reboot icon is shown in
Figure 9-10 Sequenced Reboot Icon
Sequenced Reboot Window
Use the Sequenced Reboot window to configure switches to reboot in a specified order. This
prevents unexpected lapses in fabric availability. For more information, refer to
or
Setup a Sequenced Reboot
The Sequenced Reboot window is shown in
9-8
or
on
page
Figure
9-10.
11-7.
Figure
9-11.
Reboot
on
page 7-3
Fabric Manager User's Guide