Implementing Security - HP StorageWorks 8B - FC Entry Switch User Manual
Fabric manager user's guide (version 3.0)
Hide thumbs
Also See for StorageWorks 8B - FC Entry Switch:
- Reference manual (342 pages) ,
- User manual (161 pages) ,
- Getting started manual (60 pages)
Table of Contents
Advertisement
11
Administrative Task Examples
Implementing Security
To set up a secure fabric, perform the following steps:
1.
Highlight a switch from the SAN Elements tab.
2.
Select Actions > Security.
3.
Log into a switch. This switch becomes a secure access point.
The Security Admin window appears.
4.
Select the Fabric Configuration Servers tab.
5.
Select a switch from the Available Switch List column and use the Add FCS button to add it to
the FCS Switch List.
6.
Select Save.
7.
Select the Device Connection Controls tab.
8.
Select the Create Policy button.
A dialog box appears.
9.
Enter a name for a new policy and select OK.
10. Select Save.
11. Select the Switch Connection Controls tab.
12. Enter the WWN for a switch that you want to include in the secure fabric.
13. Select Add Switch.
14. Repeat steps 12 - 13 until all desired switches have been added.
15. Check the Enforce Policy box.
16. Select Save.
17. Select the Management Access Controls tab.
18. Select the sub-tab of interest.
For example, select the HTTP tab to provide HTTP access to a particular switch.
19. Enter the IP address of the switch to which you want to provide permissions.
20. Select Add IP.
21. Check the Enforce Policy box.
22. Select Activate to save and apply the security configurations.
11-8
Fabric Manager User's Guide
Advertisement
Table of Contents
