Zone Admin; Name Server; Isl - HP StorageWorks 8B - FC Entry Switch User Manual

6
Actions Menu
10. Check the No Node WWN Zoning box if you want Node WWNs to be excluded from WWN
based Zoning.
11. Select Activate to save and apply changes.

Zone Admin

When using the Actions > Zone Admin option, you are actually accessing Web Tools, which is an
optionally licensed software.
For more detailed information regarding Web Tools, refer to the appropriate version of the Web
Tools User's Guide or the Zoning User's Guide.
Administrative privileges are required to access this view.

Name Server

When using the Actions > Name Server option, you are actually accessing Web Tools, which is an
optionally licensed software.
For more detailed information regarding Web Tools, refer to the appropriate version of the Web
Tools User's Guide.

ISL

Use the ISL option of the Actions menu to record and monitor the ISL configuration for a fabric.
There are two separate actions that can be taken when using the ISL option:
•
ISL Checking
•
Restamp (available only when ISL Checking is enabled)
Note:
Enabling ISL Checking
When ISL Checking is enabled, a snapshot (or stamp) is taken of the topology. When a change
occurs in the ISLs, the detailed information will be shown on the Status Reason section of the
Events page. For more information about Events, refer to
To enable ISL checking:
1. Select Actions.
2. Select ISL.
3. Select ISL Checking.
6-14
ISL Checking requires FOS 2.6 or later. The ISL feature will be grayed out if the launch
switch is running a version of FOS prior to 2.6 (even if switches under the launch switch
are running newer versions of FOS).
Events on page 6-2.
Fabric Manager User's Guide