Management Access Controls - HP StorageWorks 8B - FC Entry Switch User Manual

7. Highlight switches from the Switches/Devices column and use the Add Member button (or
drag and drop) to include them in the Device/Switch Binding Rule column. Use shift/click to
select multiple switches.
Select the Add Device WWN button to add a device WWN not already in fabric.
Note:
8. Select Activate to save, implement the policy to the selected switches and exit the security
dialog box.
Select Save to save changes without implementing policies. You can come back later to make
changes.

Management Access Controls

The Management Access Controls tab of the Actions > Security menu is shown in
Note:
Figure 6-5
The following are samples of the SES tab and FRONTPANEL tab of Management Control Access
window:
Fabric Manager User's Guide
and/or
When you add switch ports with devices already connected, those devices will be
automatically added to the rhs device ports folder, when the switch is added.
or
To use FM 30 security policy management, the host must be allowed access to both HTTP
and API interfaces. If the FM3.0 host ip is excluded from either MAC policies security
policy management will not work correctly.
Management Access Controls Tab of the Security Menu
6
Actions Menu
Figure 6-5.
6-7