Validate Merge-Ability Of Two Fabrics; Monitor Isls - HP StorageWorks 8B - FC Entry Switch User Manual

The Configure Compare/Download window appears.
10. Select Apply to apply baseline configuration to switches.
Select Print a Report to print a report of switch configuration comparisons.
Select Cancel to exit window without saving changes.

Validate Merge-ability of Two Fabrics

Perform the following steps to validate the merge-ability of two fabrics:
1. Setup File Transfer properties by selecting File > Options.
2. Select the File Transfer tab.
For detailed information about setting up File Transfer properties, see
page
3. Select Tools > Fabric Merge.
4. Select two fabrics to be merge-tested by using the drop-down menus.
5. Select the Check button at the bottom of the window.
6. The Login Setup window appears, if you have not already logged into the switch.
Enter the User Name and Password at the top of the window.
7. Highlight switches from the right-hand table to be tested.
To select multiple switches, use Shift/Click.
8. Add selected switches to be tested by clicking on the right-arrow button, or by dragging and
dropping selections from the table to the navigation-tree.
9. Select the Test button.
10. Check the status of your test in the Status column of the table.

Monitor ISLs

For more information regarding ISLs, see
To monitor ISLs and Fabric Configurations, perform the following steps:
1. Select File > Options.
The Options window appears with three tab choices.
2. Select the ISL Status tab.
Fabric Manager User's Guide
or
or
4-7.
Administrative Task Examples
ISL on page 6-14.
11
File Transfer Tab on
11-5