Setup A Sequenced Reboot - HP StorageWorks 8B - FC Entry Switch User Manual

11. Click the left arrow, or use drag and drop to move switches from the table to the reboot group.
Note:
Two reboot groups can be merged by dragging one group and dropping it on another group.
The switch reboot sequence can be changed by selecting one or more groups and pressing the
up/down arrow button to move the selected groups up/down in the order of reboot.
12. Select Apply or OK to save reboot group.
The Sequenced Reboot window will appear. For instructions on proceeding with reboot, see

Setup a Sequenced Reboot

For more information regarding reboot groups, see
Setup a Sequenced Reboot
To setup a sequenced reboot, perform the following steps:
1. Select Tools > Reboot > Sequence Reboot.
Select the Sequence Reboot Icon in Fabric View. For more information, see
on
The Sequenced Reboot window appears.
2. Select a fabric from the drop-down menu at the top of the window.
3. Highlight the name of your group from the navigation-tree by clicking on it.
4. Select switches from the right-hand table to be added to the reboot group.
5. Select the Login Setup button (if you have not previously logged into the switches).
6. Select OK to proceed when the confirmation window appears.
7. Select Reboot to administer sequenced reboot.
8. Login to switch if you are prompted.
9. Press Abort to abort the sequenced reboot at any time.
If you have set up a delay on the reboot group, a delay timer displays. Press the
Play-Pause-Skip button on the delay timer at runtime.
10. View message at the end of sequenced reboot.
A message displays the success or failure of the operation.
Fabric Manager User's Guide
Delete switches or reboot groups by pressing the delete button; this will move the
related switches to the table of unassigned switches.
on page
or
page 7-4.
Administrative Task Examples
11-7.
Reboot on page
11
7-3.
Sequenced Reboot
11-7