JVC GR-DVM75 Instructions Manual page 91

Warning Indications
Indications Function
_BBg
E33]
CHECK TAPE'S ERASE
PROTECTION TAB
O
HEAD CLEANING
REQUIRED USE
CLEANING CASSETTE
[]
CONDENSATION
OPERATION PAUSED
PLEASE WAIT
TAPE!
TAPE END
DIFFERENT
FORMATTED TAPE
SET DATE/TIME!
A. DUB ERROR!
A. DUB ERROR!
<CANNOT DUB
ON ALP RECORDED
TAPE>
<CANNOT DUB
ON A16BIT
RECORDING>
<CHECK TAPE'S ERASE
PROTECTION TAB>
<MEMORY CARD>
Displays the battery remaining power.
Remaining power leveI: high _-'_l-*_-'-_l-_'_dl-*_
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator _]
blinks.
When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded. (:," pg. 12)
Appears when the erase protection tab is set to "SAVE" while the Power
Switch is set to "Q" or "_" and the VIDEO/DSC Switch (GR=DVM75
only) is set to "VIDEO". (:," pg. 16)
Appears if dirt is detected on the heads during recording. Use an optional
cIeaning cassette. (:," pg. 94)
Appears if condensation occurs. When this indication is displayed, wait
more than 1 hour until condensation disappears.
Appears if a tape is not loaded when the Recording Start/Stop Button or
SNAPSHOT Button is pressed while the Power Switch is set to "n - or
"_" and the VIDEO/DSC Switch (GR=DVM75 only) is set to "VIDEO".
Appears when the tape ends during recording or playback. (:," pg. 77)
Appears if a tape in another format is loaded.
• Appears when the date/time is not set. (_" pg. 11)
• Appears when the built-in clock battery runs out and the
previously set date/time is erased. ConsuIt your nearest JVC dealer for
replacement.
Appears if Audio Dubbing is attempted on a blank portion of a tape.
(_," pg. 66)
• Appears if Audio Dubbing is attempted on a tape recorded in the LP
mode. (;, pg. 66)
• Appears if Audio Dubbing is attempted on a tape recorded in 16-bit
audio. (:, pg. 66)
• Appears if A. DUB (_) on the remote control is pressed when the erase
protection tab is set to "SAVE". (:," pg. 66)
• Appears if Audio Dubbing using Digital Sound Effects is attempted
when a memory card is not loaded. (;," pg. 67)
Appears when the memory card's memory is full and shooting is not
MEMORY IS FULL possible.
INSERT ERROR! Appears if Insert Editing is attempted on a blank portion of a tape.
(:," pg. 68)
CONTINUED ON NEXT PAGE