JVC GR-DVM75 Instructions Manual page 80

80EN
16. Program AE with special 16. • The Power Switch is set to 16. • Set the Power Switch to "[M"
effects and Fade/Wipe Effects ,, rl ,, pg. 18}.
do not work.
17. The Black & White Fadel 17. • The Sepia or Monotone mode 17. • Turn off Sepia and Monotone
does not work. is activated. (" pg. 46, 48).
l& The Dissdve function does
not work.
19. The Picture Wipe and
Dissolve functions do not
work.
18. • The Sepia, Monotone or Slow
Shutter mcxAe of Program AE
with special effects is
activated.
• "WIDE ME)DE" is set to
"SQUEEZE F_] " in the Menu
Screen.
• The previously setected mode
of Program AE with special
effects was changed after the
last selected scene fur editing
was registered.
19. • The last selected editing scene
is ending.
• At the end of the last selected
scene for editing, the Power
Switch was s_t to "OFF".
• The power is off.
_8. • Turn off Sepia, Monotone or
Slow Shut_r before adding
Dissolve to a scene transition
/ " pg. 48, 48).
• S_t "WIDE ME)DE" to
"CINEMA _ " or "OFF"
mode ( " pg. 40).
• Make sure you have setected
the mode of Program AE with
special effects you want
before starting editing
( ' pg. 46,48).
_9. • Select Picture Wipe or
Dissolve before beginning
recording. The effects are then
automatically activated
(' pg. 48).
• Do not turn off the
camcoldel's power a_te_r
setting Edibh_ and Edit Out
r_->ints, as they will all be
erased ( pg. 48).
• The camcorder automatically
shuts off after 5 minutes have
dapsed in the Record Standby
mc×le. Make sure you
continue operations within
5 minutes after engaging
Record Standby mode
(' pg. 48).
20. The picture wipe function 20. • The Slow Shutter mode is 20. • Disengage the Slow Shutter
does not work. activated, mode or set "WIDE MODE"
• "WIDE ME)DE" is not set to to "OFF" beiule pleparing to
"OFF". use the Pictu_ Wipe
(' pg. 40, 46, 48).
21. Scene transition does not go 21.
as expected.
21. • When using "Picture Wipe/
Dissolve" ( "pg. 48), there is
a delay of a fraction of a
second between the previous
record stop point and the
Dissolve start point. This is
normal, but this slight delay
becomes especially
noticeable when shooting
fast moving subject or during
rapid panning.
22, • The Picture Wipe or
Dissolve functions are in use.
• "WIDE ME)DE" is set to
"SQUEEZE [_] " in the Menu
Sc_-een.
• A Fade _n or Fade ()Lit is in
22. The Video Echo mode does
not wolk.
progress.
22. • Set "WIDE ME)DE" to
"CINEMA _ " or "OFF"
mode ( • pg. 40).
• Do not try to use the Video
Echo mode during a Fade In
or Fade-Out ( pg. 46,48).