JVC GR-DVM75 Instructions Manual page 55

Dispbay
Power Swilch
MENU Wheel
MANUAL Menu
.55
FlashBrightness A djustment
(GR-DVM75 only)
When a snapshot (1 pg. 26, 50) is taken in the dark the
camcorder fires the flash (_" pg. 54) and adjusts tile
brightness automatically. You can also adjust the flash
brightness manually. When you find that the snapshots
you took look too bright ol too dalk, adjust it manualty.
Set the Power Switch to "_" while plessing down
the Lock Button located on the switch. Open the
LCD monitol fully or pull out the viewfinder futly.
hess the MENU Wheel in. The Menu Screen
appears.
Rotate the MENU Wheel to select "_ MANUAL",
and pless iL The MANUAL Menu appears.
Rotate the MENU Wheel to select "FLASH ADJ.", and
pless iL The parameter appears.
To intensify the flash, rotate the MENU Wheel
towards "+'. To weaken the flash, rotate it towards
"-'. Adjustment range: 3 to +3.
hess the MENU Wheel in. Rotate it to select
'IJRETURN" and press it twice to close the Menu
Screen,
NOTE:
When you change tile subject you are shootin_ or Ihe
shooting location, set it bark lo ±0 as described in step 5
and take a snapshot to rherk the flash brightness, Alter
(k)in_ this adjust to your d_sired brightness.