JVC GR-DVM75 Instructions Manual page 19

E.19
JournalisticShooting
In some situations, dilferent shooting angles may
provide more dlamatic lesults. Hold the camcolder
in the desired position and tilt the LCD monitor in
the most convenient direction. It can rotate 270 °
(90° downward, 180° upwardL
Self-Recording
You can shoot youlself while viewing your own
image in the LCD monitor. Open the L{D monitor
and tilt it upward 180° so that it faces forward, then
point the lens toward yourself and start recording.
T +
Zoom display
Digital zoom zone
IOX (optical) zoom
zone
Approximate zoom ratio
Power Zoom
Lever
FEATURE:
Zooming
PURPOSE:
To produce the zoom in/out etfect, or an instantaneous
change in image magnification,
OPERATION:
Zoom In
Slide tile Powel Zoom Lever towards "T".
Zoom Out
Slide tile Powel Zoom Lever towards "W",
• The further you stide the Power Zoom Lever, the
quickel the zoom action.
NOTES:
• Focusing may become unstable during Zooming: hi
Ibis cas_, set lbe zoom while in Record_Standby,
lock lbe focus by using the nlanuat focus
(., pg. 51), lhen zoom in or out in Record mode,
• Zooming is possible to a maximum of 200X with
GR-DVM75 or 300X with GR-DVM55, ol it can be
switched to 10X magnification using the optical
zoom 1:, tag. 39).
• Zoom magnification of over 10X is done [brough
Digilal image processing; and is theretbre called
Digital Zoom.
• During Digital zoom, fl_e qualily of image may
£;uffPt:
• Digital zoom cannot be used in tile tbllowing cases:
• When digital image processing; such as Picture
Wipe/Dissolve 1: , pg: 48, 49) or Video E_ho
(- , pg. 47), is activaled.
• Macro shooting (as dose as approx. 5 on (2") to tile
subject) is possible when tile Power Zoom Lever is
set all Ihe way to "W". Also see "TELE MACRO" in
tbe Menu Screen on page 39.