JVC GR-DVM75 Instructions Manual page 14

14EN
CARD OPEN
Label
Memory card
Card
Cover
d
be
Clipped edge
Loading A Memory Card
(GR-DVM75 only)
Tile provided memory card is already insoted in the
call)corder when you receive the call)corder,
Make sule the camcorder's power is off.
Slide CARD OPEN to open the card cover,
Insert the memory card firmly clipped edge first.
• Do not touch tile terminal on the leverse side of
the label.
To close the card cover, push it until you heal a
dick.
To Unload A Memory Card...
.... in step 3 push the memory card, then the memory
cald comes out of the camcorder automatically. Putl
it out and close the cald cover.
NOTES:
• Be sure to use only SD Memory t"ards nlarked "_. "
or MultiM_diaCards marked "MllllilVl_diaCard ".
• Some brands of memory cards are not compatible with
this canlcorder. Betbre purchasing a memory card,
consult its fTtal_ufdcturer or d_aten
• Before ush_# a new nlemory card, it g necessary to
FORMAT Ihe card. ," pg: 36
ATTENTION:
Do not insert/remove the memory card while the
camcorder is turned on, as this may cause the
_rlen_oly cald to be corlupted or cause the calncorder
to become unable to recognize whether or not the
card is installed.