JVC GR-DVM75 Instructions Manual page 42

4
Power Switch
MENU Wheel
Display
*Actua[ menus differ by mode[ and may
appear differently from these i[tustrations.
Some menu items may not be unavailable
on youl model
ForPlayback Menu
The following procedule applies to all except Synchro
Comp (_," pg. 73).
Set the Power Switch to "_" while pressing down
the Lock Button located on the switch. ()pen the LCD
monitor fully or pull out the viewfinder fully.
Press the MENU Wheel im The Menu Screen
appeals.
Rotate the MENU Whee[ to select the desired
function icon, and press iL The selected function
menu appears.
Rotate the MENU Whee[ to select the desired
function, and press it to display the Sub Menu.
Rotate the MENU Whee[ to select the desired
parameter and press it. Selection is complete.
Rotate the MENU Whee[ to select "tlRETURN" and
press it twice to close the Menu Screem
Menu Screen Explanations
SOUND MODE _" pg. 44,
12BIT MODE _" pg. 44.
SYNCHRE) _" pg. 73.
REC MODE A[lows you to set the video
recording mode (8P or LP)
depending on youl pleference
(: pg. 13). It is lecommended
,ou use "REC MODE" in the
,,r_ VIDE()" when using this
camcoldel as a recorder duling
1_ digitat dubbing (," pg, 57, 58).
_ M ON: Enables dubbing of images
COPY recorded on a tape to a memory
GR-DVM75 cold ( pg. 60).
only) OFF: Enables snapshots to be
taken during video playback.
S/AV INPUT ON: Enables audio/video signal
GR-DVM75 input from the AV and S-VIDEO
only) connectors ( pg. 57).
OFF: Enables audio/video signal
output to a TV, VCR, etc_ via the
AV (headphone) and S VIDEO
connectors ( pg. 22, 57).
CONTINUED ON NEXT PAGE
NOTES:
• It is ago po_sibl_ to rhang_ tile ON SCREEN setting_ by
pressing DISPLAY on the remote control (provided).
• "REC MODE" can be set when the Power Switch is set
to ,,r_l_ "or "_ <'(_7' p_. 13, 39),
• When "SLAV INPUT" is set to "ON", camcorder
playback cannot be viewed on Ihe AV output,