JVC GR-DVM75 Instructions Manual page 46

4-6EN
IMPORTANT:
Scmle mottos of Progranl AE wilh special
effects cannot be used with cerlain Fade/Wipe
Effects pg, 4& 49). tf an unusabl_ mode g
selected, it_ indicator blinks or goes out:
PROGRAM AE Button o .o
Power Switch
MENU Wheel
Program AEWithSpecial Effects
Set the Power Switch to "_" while pressing down
the Lock Button located on the switch, Open the
LCD monitor fully or pull out the viewfinder lutly.
Press the MENU Wheel in. The Menu Screen
appeas.
Rotate the MENU Wheel to select "[_ PROGRAM
AE", then press it. PROGRAM AE Menu appears.
Rotate the MENU Wheel to select the desired mode
(," pg. 47), then pless it. Selection is complete.
Press the MENU Wheel in again. The Menu Screen
doses,
Press PROGRAM AE,
• The selected mode indicator appears.
To Deactivate The Selected Mode...
,,, Press PROGRAM AE again so that the mode indicator
disappears.
NOTES:
° Progranl AE wilh special et?_cls can be changed during
recording or during Record_Slandby.
° Some modes of Program AE Special Effects cannot be
used during Night,Alive (: pg: 45).
Display
PROGRAM AE
Menu
GR-DVM75 only