Changing Vcr Plus+ ® Setting - JVC DR-M10 Instructions Manual

Dvd video recorder
Hide thumbs Also See for DR-M10:
Table of Contents

Advertisement

62
EN
TIMER RECORDING
(cont.)
Changing VCR
Plus+ ® Setting
• Turn on the unit.
• Turn on the TV and select the AV mode.
• Slide the TV/CABLE/DBS/DVD
switch to DVD.
SET UP
iw
TV
vcRplu_ PROG_HeCK
nECLINKTIMEn
PREVIOUS
SLOW- Pt_SEtECT SLOW+
REC_ODE LIVECHECK
_
o 0q0,PEN£
SETUP
_00@
JVC
The VCR Plus+ programing
system assigns a VCR Plus+
guide channel
to the TV channels
and the cable
channels.
These guide channel
numbers
are also called
the VCR Plus+ channel
codes. Most TV listings
have a
section,
usually
a chart, indicating
the guide channel
numbers
assigned to each station.
lb ensure that VCR Plus+ timer
recording
operates
correctly,
it is necessary to set the VCR Plus+ "Guide
Channel
Set" for each station.
If you have moved
to a different
area or if a broadcasting
station's
channel
number
has been changed,
perform
the
following
steps to set the correct
guide channel
number.
NOTES:
• In many instances, the VCR Plus+ guide dlannel
numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your unit or cable box.
Check your TV listing, or contact your cable supplier for
details.
• Many TV stations can be viewed on cable. Check your TV
listing, or contact your cable supplier for details.
Guide Channel Number Set
Access the Main Menuscreen.
Press SET UP.
I_1
Access the "TUNERSET"screen.
[]
Press _ _" to select
"INFrIAI.
SET UP', then
press ENTER.
[]
Press 4 b" to select
"TUNER
SET", then press
ENTER.
I_1
Enterthe GuideChannel n umber.
[]
Press i\V
to select
"GUIDE
CH SET", then
.....
_ "_
press ENTER.
[]
Press/'\_
to select
"GUIDE
CH',
then press
ENTER.
[]
Press i\V
to select the
Guide Channel
number
for the desired station
as
shown
in the TV listings.
Then press ENTER.
• To change the Guide Channel number in 10 increments, press
and hold/\V.
• [f you receive your channels with a cable box and if you have
properly set your Controller, "CATV CH'appears
in place of
"DVD CH'. if not, perform "Changing VCR Plus+ _Setting"
(_-_"pg. 62).

Advertisement

Table of Contents
loading

Table of Contents