Tuner Set - JVC DR-M10 Instructions Manual

26"EN
INITIAL SETTINGS (cont.)
[unerSet
elurn oil the unit.
• Turn on the TV and select the AV mode.
• Slide the TV/CABLE/DBS/DVD switch to DVD.
TV_DVD
w w f o/ _TANO_Y76_'
v_n Plu_Pn0G_H_ n ECLINKTIMEn
MENU nETURN
PREVIOUS
SLOW- P_SE_ECT SLOW+
REC_ODE LIVECHECK _
0000
_00®
SITUP
Auto Channel Set
Perform Auto Channel Set only if dlannels have not been set
correctly by the Plug&Play setting.
dVC
Access the Main Menuscreen.
Press SET UP.
I_1 Access the "TUNERSET"screen.
[] Press _ to select
"INITIAl. SET UP", then
press ENTER.
[] Press _ _ to select
"TUNER SET", then press
ENTER.
I_1 PerformAutoChannel S et.
Press/"_V to move the arrow
to "AUTO CH SET", then
press ENTER. You can
automatically set the
receivable channels in your
area in the order of their
frequencies.
• When Auto Channel Set is complete, "SCAN COMPLETED"
appears on the IV screen.
• [f the scan was unsuccessful, "SCAN COMPLETED NO
SIGNAL-" appears on screen. Check the connections and start
again.
L_e Complete the setting.
Press SET UP.
INFORMATION
]he unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. [he selected band will be
displayed on the right side of "BAND" on the Tuner Set
screen.