Component Video Connection - JVC DR-M10 Instructions Manual

20 EN INSTALLING YOUR NEW UNIT (cont.)
Component Video
Connection
Antenna or Cable
Coaxial cable ]
._ Flat feeder
Matching transformer
(not supplied)
ANTENNA
IN
COMPONENT OUTPUT
Component Video
cable
(not supplied)
To Component
Video Input
connectors
AC Outlet
Component video connection enables you to obtain high-quality
component video pictures,
IITo connect to TV's component video input connectors
Connect t heunit to TV.
[] Perform [] -[] in step [] in "Basic Connections"
g-_ pg. 18).
[] Connect the unit's COMPONENT OUTPUI
connectors to the TV's component video input
connectors.
[] Connect the unit's AUDIO OUIPUT connectors to the
TV's AUDIO input connectors.
F_ Connect t heunit to power source.
Plug the end of the AC power cord into all AC outlet, lhis
unit performs Plug & Play Set automatically. (_7 _pg. 21 )
• The clock an(] tuner channels will automatically be set when
,,_N ot_-:_':):n n e (ted
Audio/video cable
(supplied)
the antenna is connected and when the AC power cord is first
connected to an AC outlet. (if "AUTO" an(] the channel
indicator are displayed on the front display panel before the
unit is powered on, the clock an(] tuner channels are being set
automatically. Wait for the time to be displayed on the front
display panel before turning on the unit.)
NOTES:
• If your 1-V is not stereo-capable, use the unit's AUDIO
OUTPUT connectors to connect to an audio amplifier for
Hi-Fi stere() sound reproduction.
• For switching the TV's vide() input mode, refer to the
instruction manual of your television.
To audio input
con nectors
R) 75 ohm
Terminal TV