JVC DR-M10 Instructions Manual

JVC DR-M10 Instructions Manual

Dvd video recorder
Hide thumbs Also See for DR-M10:

Advertisement

Quick Links

Table of Contents
Filename [DR-M10SE_02Cov1.fm]
DR-M10SE_02Cov1.fm Page 1 Friday, March 5, 2004 4:27 PM

DVD VIDEO RECORDER

CABLE/DBS
TV
DVD
STANDBY/ON
TV
TV/
MUTING
VIDEO
TV/CBL/DBS
DVD
TV VOLUME
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
CH
DBS
CANCEL
AUX
MEMO/MARK
VCR Plus+
PROG/CHECK
REC LINK
TIMER
TOP MENU
NAVIGATION
ENTER
MENU
RETURN
PREVIOUS
NEXT
SLOW
PLAY/SELECT
SLOW
REC
STOP/
CLEAR
PAUSE
REC MODE LIVE CHECK
OPEN/
SET UP DISPLAY ON SCREEN
CLOSE
1 STANDBY/ON
PROGRESSIVE
AUDIO SUBTITLE ANGLE
SCAN
F1
S-VIDEO
VIDEO
INSTRUCTIONS
REC MODE
SAT
#
PULL - OPEN
DV
DV IN
L(MONO)-AUDIO-R
EN
LPT0900-001B

Advertisement

Table of Contents
loading

  Related Manuals for JVC DR-M10

  Summary of Contents for JVC DR-M10

  • Page 1: Dvd Video Recorder

    Filename [DR-M10SE_02Cov1.fm] DR-M10SE_02Cov1.fm Page 1 Friday, March 5, 2004 4:27 PM DVD VIDEO RECORDER CABLE/DBS STANDBY/ON MUTING VIDEO TV/CBL/DBS TV VOLUME PQRS WXYZ CANCEL MEMO/MARK VCR Plus+ PROG/CHECK REC LINK TIMER TOP MENU NAVIGATION ENTER MENU RETURN PREVIOUS NEXT SLOW PLAY/SELECT SLOW STOP/...
  • Page 2: Safety First

    Filename [DR-M10SE_03Safety.fm] Masterpage:Left0 DR-M10SE_03Safety.fm Page 2 Friday, February 13, 2004 2:10 PM SAFETY FIRST Safety Precautions CAUTION 8 When you are not using the unit for a long period of time, it is recommended that you disconnect the The rating plate and the safety caution are on the rear of power cord from the mains outlet.
  • Page 3 For Italy: Moisture in the air will condense on the unit when you “It is declared that this product, brand JVC, conforms move it from a cold place to a warm place, or under to the Ministry Decree n. 548 of 28 Aug.’95 published extremely humid conditions—just as water droplets form...
  • Page 4: Table Of Contents

    Filename [DR-M10SE_01TOC.fm] Masterpage:Left DR-M10SE_01TOC.fm Page 4 Friday, February 13, 2004 2:25 PM CONTENTS SAFETY FIRST EDITING Safety Precautions ..........2 DV Dubbing ............78 Edit From A Camcorder ........80 DISC INFORMATION Edit To Or From Another Recorder ....81 Output/Input Set ..........
  • Page 5: Disc Information

    VR mode. unsatisfactory results. Using discs manufactured by JVC is Either in video mode or in VR mode, although the disc can be recommended since they have been tested to be compatible played back on DVD players from other manufacturers, with this unit.
  • Page 6: Discs For Playback Only

    Filename [DR-M10SE_05DiscInfo.fm] Masterpage:Left+ DR-M10SE_01.book Page 6 Thursday, February 12, 2004 9:08 PM DISC INFORMATION (cont.) Discs for Playback Only Unplayable Discs You can use discs with the following logos for playback only. The following types of discs cannot be played using this unit. Do not attempt to play back any kind of disc that is damaged (cracked, warped, or repaired with adhesive tape) or discs in DVD VIDEO...
  • Page 7 Filename [DR-M10SE_05DiscInfo.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 7 Thursday, February 12, 2004 9:08 PM Recording Medium and Format File Structure of Discs DVD-RAM DVD VIDEO Recording and erasing can be performed as many times as Typically, DVD VIDEO discs are made up of larger units called possible on a disc.
  • Page 8 Filename [DR-M10SE_05DiscInfo.fm] Masterpage:Left+ DR-M10SE_01.book Page 8 Thursday, February 12, 2004 9:08 PM DISC INFORMATION (cont.) DVD VIDEO Marks JPEG/MP3 Disc (CD-R/RW/ROM) MP3/JPEG files put in directories nested in several levels on a disc will be organized as if they were put in single level Sometimes marks are printed on a DVD disc and/or on its directories (groups) by the MP3/JPEG Navigation of this unit.
  • Page 9 Filename [DR-M10SE_05DiscInfo.fm] Masterpage:Right-No-Heading DR-M10SE_05DiscInfo.fm Page 9 Friday, February 13, 2004 2:12 PM Placing a Disc Care and Handling of Discs How to handle discs Opening the disc tray When handling a disc, do Press x on the unit or remote control to open the disc not touch the surface of the disc.
  • Page 10: Index

    Filename [DR-M10SE_06Name.fm] Masterpage:Left0 DR-M10SE_01.book Page 10 Thursday, February 12, 2004 9:08 PM INDEX FRONT VIEW G H I J REC MODE VIDEO 1 STANDBY/ON DV IN S-VIDEO VIDEO L(MONO)-AUDIO-R A Infrared Beam Receiving Window I Recording Mode Button (REC MODE) pg.
  • Page 11: Rear View

    Filename [DR-M10SE_06Name.fm] Masterpage:Right-No-Heading DR-M10SE_06Name.fm Page 11 Thursday, March 4, 2004 2:54 PM REAR VIEW A Antenna Input Connector (ANTENNA IN) G Cooling Fan pg. 16 This prevents the temperature from rising inside the unit. Do not remove it. B Component Video Output Connectors Install the unit so as not to block the area around the fan.
  • Page 12: Front Display Panel

    Filename [DR-M10SE_06Name.fm] Masterpage:Left+ DR-M10SE_01.book Page 12 Thursday, February 12, 2004 9:08 PM INDEX (cont.) FRONT DISPLAY PANEL A VPS/PDC Indicator D Recording Mode Indicator (XP/SP/LP/EP/FR) pg. 57 pg. 52 Appears when checking if the station being received transmits a VPS/PDC signal. Blinks when recording mode is being set.
  • Page 13 Filename [DR-M10SE_06Name.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 13 Thursday, February 12, 2004 9:08 PM G Simulated Surround Effect Indicator (3D) K Video Output Indicator ( ) pg. 108 pg. 44 No display: Indicates that interlace mode is engaged. Indicates that progressive mode is engaged. Lights when a simulated surround effect is set to “3D-ON”...
  • Page 14 Filename [DR-M10SE_06Name.fm] Masterpage:Left+ DR-M10SE_01.book Page 14 Thursday, February 12, 2004 9:08 PM INDEX (cont.) ON-SCREEN DISPLAY When “SUPERIMPOSE” is set to “AUTO” and ON SCREEN on the remote control is pressed, various operational indicators appear on the TV screen. To clear the operational indicators, press ON SCREEN again. A Disc Display G Chapter Number Displays the type of the disc loaded on the disc tray.
  • Page 15: Remote Control

    The remote control can operate most of your unit’s functions, be used to operate your TV. ( pg. 86) as well as basic functions of TV sets and satellite receivers of JVC and other brands. ( pg. 85, “Remote Control A TV Muting Button (TV pg. 86 Functions”)
  • Page 16: Installing Your New Unit

    Filename [DR-M10SE_06Name.fm] Masterpage:Left0 DR-M10SE_01.book Page 16 Thursday, February 12, 2004 9:08 PM INSTALLING YOUR NEW UNIT It’s essential that your unit be properly connected. Basic Connections THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED. Check the contents. Aerial connector Back of TV Make sure the package contains all of the accessories...
  • Page 17: S-Video Connection

    Filename [DR-M10SE_06Name.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 17 Thursday, February 12, 2004 9:08 PM 8 To connect to TV’s S-VIDEO input and AUDIO input S-VIDEO connectors Connection Connect the unit to a TV. A Connect the aerial, unit and TV as per “Basic Connections”.
  • Page 18: Component Video Connection

    Filename [DR-M10SE_06Name.fm] Masterpage:Left+ DR-M10SE_01.book Page 18 Thursday, February 12, 2004 9:08 PM INSTALLING YOUR NEW UNIT (cont.) Component video connection enables you to obtain high-quality Component Video component video pictures. 8 To connect to TV’s component video input connectors Connection Connect the unit to TV.
  • Page 19: Initial Settings

    Filename [DR-M10SE_06Name.fm] Masterpage:Right0 DR-M10SE_01.book Page 19 Thursday, February 12, 2004 9:08 PM INITIAL SETTINGS Auto Set Up Before starting, make sure of the following: The TV aerial cable should be connected to the unit. The unit’s mains power cord should be connected to a mains outlet.
  • Page 20 Filename [DR-M10SE_06Name.fm] Masterpage:Left+ DR-M10SE_01.book Page 20 Thursday, February 12, 2004 9:08 PM INITIAL SETTINGS (cont.) ATTENTION: Perform Auto Set Up. Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their A Press ENTER.
  • Page 21: Preset Download

    Filename [DR-M10SE_06Name.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 21 Thursday, February 12, 2004 9:08 PM If you have connected the unit to your TV via a 21-pin SCART Preset Download cable ( pg. 16), the unit will automatically perform Preset Download instead of the Auto Set Up in step D on page 20. After downloading, the unit sets the clock and Guide Program Auto Channel Set by Downloading numbers automatically.
  • Page 22 Filename [DR-M10SE_06Name.fm] Masterpage:Left+ DR-M10SE_01.book Page 22 Thursday, February 12, 2004 9:08 PM INITIAL SETTINGS (cont.) Results of Auto Set Up/Preset Download appearing on the front display panel If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed.
  • Page 23: Monitor Set

    Filename [DR-M10SE_06Name.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 23 Thursday, February 12, 2004 9:08 PM (The boldface settings in the table below indicate the settings at Monitor Set your purchase.) 8 MONITOR TYPE You can select the monitor type depending on the TV 4:3LB (Letter Box conversion): used when you play back DVD VIDEO discs recorded for Select this when the aspect ratio of your TV is...
  • Page 24: Language

    Filename [DR-M10SE_06Name.fm] Masterpage:Left+ DR-M10SE_01.book Page 24 Thursday, February 12, 2004 9:08 PM INITIAL SETTINGS (cont.) Language Select the desired language. A Press rt to move the arrow to “ON SCREEN LANGUAGE”, then press ENTER. B Press rt to select your desired language, then press Turn on the unit.
  • Page 25: Language Code List

    Filename [DR-M10SE_06Name.fm] Masterpage:Right 3Column DR-M10SE_06Name.fm Page 25 Thursday, March 4, 2004 2:55 PM Language Code List Afar Inupiak Kirundi Abkhazian Indonesian Rumanian Afrikaans Icelandic Russian Ameharic Hebrew Kinyarwanda Arabic Yiddish Sanskrit Assamese Javanese Sindhi Aymara Georgian Sangho Azerbaijani Kazakh Serbo-Croatian Bashkir Greenlandic Singhalese...
  • Page 26: Sat Control Set

    Filename [DR-M10SE_06Name.fm] Masterpage:Left0 DR-M10SE_01.book Page 26 Thursday, February 12, 2004 9:08 PM SAT CONTROL SET The following procedure is required if you receive Satellite Receiver satellite channels through a satellite receiver. Approximately 20 seconds before the S timer programming ( pg.
  • Page 27 Filename [DR-M10SE_06Name.fm] Masterpage:Right0 DR-M10SE_01.book Page 27 Thursday, February 12, 2004 9:08 PM Setting satellite receiver’s brand and CABLE/SAT CABLE/SAT channel STANDBY/ON TV AV TV/CBL/SAT VIDEO After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly. 0 –...
  • Page 28: T-V Link

    Filename [DR-M10SE_06Name.fm] Masterpage:Left0 DR-M10SE_01.book Page 28 Thursday, February 12, 2004 9:08 PM T-V LINK T-V Link Functions Check the result of the test. If the satellite receiver’s channel number has been When you connect the unit to your TV via a fully-wired 21-pin SCART cable ( pg.
  • Page 29: Playback Operations

    Filename [DR-M10SE_07Playback.fm] Masterpage:Right0 DR-M10SE_01.book Page 29 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS To play back an MP3/JPEG disc, see “Playback with MP3/JPEG Basic Playback Navigation” ( pg. 76). Load a disc. A Press x to open the disc tray. B Place the disc on the disc tray.
  • Page 30: Playback Features

    Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 30 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) Start playback. Playback Features Press rt w e to select a desired title, then press ENTER. It may be possible to select the desired item using the number keys depending on the menu display.
  • Page 31: Resume Function

    Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_07Playback.fm Page 31 Thursday, March 4, 2004 2:56 PM High-Speed Search Resume Function During playback, press 5 for forward high-speed It is possible to memorise the position where you stop playback and resume playback from that position. search, or 3 for reverse high-speed search.
  • Page 32 Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 32 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) NOTES: When a monaural programme or bilingual programme CABLE/SAT changes to a stereo programme while recording, a mark signal STANDBY/ON is automatically recorded. TV AV TV/CBL/SAT When a DVD-R/RW (Video mode) disc is finalised, marked VIDEO...
  • Page 33: Subtitle Selection

    Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 33 Thursday, February 12, 2004 9:08 PM Angle Selection Audio Language/Sound Selection You can enjoy a variety of scene angles if a DVD VIDEO disc Some DVD VIDEO discs contain the multiple audio language or contains “multi-angle”...
  • Page 34: Audio Channel Selection

    Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 34 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) NOTE: It is not possible for DVD-R/DVD-RW (Video mode) disc playback to switch the audio channel. The audio channel is 0 – 9 played back as set in “AUDIO REC” ( pg.
  • Page 35: Live Memory Playback

    Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 35 Thursday, February 12, 2004 9:08 PM Recording/playback status display Live Memory CABLE/SAT Playback STANDBY/ON TV AV TV/CBL/SAT VIDEO This unit records pictures onto DVD-RAM discs, instead of video PQRS WXYZ tapes, then plays back the pictures recorded on the discs. This makes it possible to achieve high-speed writing and read-out that has not been possible with conventional VCRs, enabling CANCEL...
  • Page 36 Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 36 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) Overview of Live Memory Playback You can play back a programme you are recording from the beginning while continuing to record or timer record onto a DVD-RAM disc.
  • Page 37 Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_07Playback.fm Page 37 Thursday, March 4, 2004 2:56 PM Display during Live Memory Playback During recording, you can watch at your will what was previously recorded or is currently being recorded. It is possible to perform freely normal playback operations (forward/reverse high-speed search and variable-speed search) within the range of the red or blue bar on the TV screen.
  • Page 38 Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 38 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) Buttons to be used during Live Memory Playback Available CABLE/SAT Functions buttons STANDBY/ON TV AV TV/CBL/SAT Pressing once skips forward to the VIDEO beginning of the next chapter being played back.
  • Page 39 Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 39 Thursday, February 12, 2004 9:08 PM To play back from the beginning of the Turn on the unit. programme while recording Turn on the TV and select the AV mode. Slide the TV/CABLE/SAT/DVD switch to DVD. You can play back a programme you are recording from the beginning while continuing to record or timer record onto a DVD-RAM disc.
  • Page 40: Using Play Set Up Menu

    Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 40 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) How to Access Play Set Up Menu Using Play Set Up Press ON SCREEN twice whenever a disc is loaded. Menu Contents of Play Set Up Menu during playback DVD VIDEO Play Set Up Menu allows you to control various playback functions.
  • Page 41 Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 41 Thursday, February 12, 2004 9:08 PM Basic operation on Play Set Up Menu CABLE/SAT Example: When selecting Picture Control function of DVD STANDBY/ON TV AV TV/CBL/SAT During playback or while stopped VIDEO Access Play Set Up Menu. Press ON SCREEN twice.
  • Page 42: Repeat Playback

    Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 42 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) Repeat Playback CABLE/SAT STANDBY/ON TV AV TV/CBL/SAT VIDEO You can repeat playback as you like according to the type of disc. 0 – 9 Access Play Set Up Menu. PQRS WXYZ Press ON SCREEN twice.
  • Page 43 Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 43 Thursday, February 12, 2004 9:08 PM A-B Repeat Playback Locating the beginning of a desired selection You can repeat the desired part. During playback You can locate the beginning of a title, chapter, group or track. Access Play Set Up Menu.
  • Page 44: Time Search

    Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 44 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) Time Search Simulated Surround Effect You can play back a disc from the desired point by specifying the It is possible to get a simulated surround effect from your stereo elapsed playing time from the beginning of a title (DVD-RAM, system.
  • Page 45: Adjusting The Picture Quality

    Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 45 Thursday, February 12, 2004 9:08 PM Adjusting the picture quality Setting the progressive mode You can obtain optimal picture quality by selecting an You can obtain optimal picture quality by selecting whether the appropriate picture mode. content on the disc is processed by field (video source) or by frame (film source).
  • Page 46: Programme Playback

    Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 46 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) Programme Playback Random Playback You can play back up to 30 tracks in the desired order. You can play back all the tracks on the disc in random order. While stopped While stopped Access Play Set Up Menu.
  • Page 47: Parental Lock

    Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 47 Thursday, February 12, 2004 9:08 PM Parental Lock Access the “PARENTAL LOCK” screen. A Press w e to select “UTILITY”, then press ENTER. B Press rt to select This function restricts playback of DVD VIDEO discs which “PARENTAL LOCK”, then contain violent (and other) scenes according to the level set by press ENTER.
  • Page 48 Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 48 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) To change the settings To temporarily release Parental Lock You can change the Parental lock settings later. When you set the parental lock level strictly, some discs may not be played back at all.
  • Page 49 Filename [DR-M10SE_07Playback.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 49 Thursday, February 12, 2004 9:08 PM Country/Area Code List for Parental Lock Andorra Spain United Arab Emirates Ethiopia Afghanistan Finland Antigua and Barbuda Fiji Anguilla Falkland Islands (Malvinas) Albania Micronesia (Federated States of) Armenia Faroe Islands Netherlands Antilles France...
  • Page 50 Filename [DR-M10SE_07Playback.fm] Masterpage:Left+ DR-M10SE_01.book Page 50 Thursday, February 12, 2004 9:08 PM PLAYBACK OPERATIONS (cont.) Saint Lucia Saudi Arabia Liechtenstein Solomon Islands Sri Lanka Seychelles Liberia Sudan Lesotho Sweden Lithuania Singapore Luxembourg Saint Helena Latvia Slovenia Libyan Arab Jamahiriya Svalbard and Jan Mayen Morocco Slovakia Monaco...
  • Page 51: Recording

    Filename [DR-M10SE_08Recording.fm] Masterpage:Right0 DR-M10SE_01.book Page 51 Thursday, February 12, 2004 9:08 PM RECORDING Basic Recording Set the recording speed. Press REC MODE repeatedly until the desired recording speed appears. Each time you press REC MODE, the recording speed changes as follows: XP ] SP ] LP ] EP ] FR60–FR360*, FR420, FR480 ] (Back to the beginning) Turn on the unit.
  • Page 52: Recording Features

    Filename [DR-M10SE_08Recording.fm] Masterpage:Left+ DR-M10SE_01.book Page 52 Thursday, February 12, 2004 9:08 PM RECORDING (cont.) Instant Timer Recording (ITR) Recording Features This easy method lets you record for from 30 minutes to 6 hours (selectable in 30-min. increments), and shuts the unit off after recording is finished.
  • Page 53 Filename [DR-M10SE_08Recording.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 53 Thursday, February 12, 2004 9:08 PM Free Rate Function NOTES: You can programme this unit to timer-record, regardless of the To record the entire programme, the unit automatically set the disc remaining time. When the disc remaining time is not appropriate recording speed depending on the combination of enough, recording may stop in the middle of a programme.
  • Page 54: Timer Recording

    Filename [DR-M10SE_08Recording.fm] Masterpage:Left0 DR-M10SE_01.book Page 54 Thursday, February 12, 2004 9:08 PM TIMER RECORDING Timer ® Load a disc. A Press x to open the disc tray. Programming B Place a recordable disc on the disc tray. For details, refer to “Placing a Disc” ( pg.
  • Page 55 Filename [DR-M10SE_08Recording.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 55 Thursday, February 12, 2004 9:08 PM NOTES: Set the following recording options as There may be cases that S programming timer required. recording function prolongs the stop time of the programming. The beginning of a programme may not be recorded. Also, if the 1st programme’s recording stop time and the 2nd A Press w e to select the desired option.
  • Page 56: Manual Timer Programming

    Filename [DR-M10SE_08Recording.fm] Masterpage:Left+ DR-M10SE_01.book Page 56 Thursday, February 12, 2004 9:08 PM TIMER RECORDING (cont.) Manual Timer Load a disc. A Press x to open the disc tray. Programming B Place a recordable disc on the disc tray. For details, refer to “Placing a Disc” ( pg.
  • Page 57 Filename [DR-M10SE_08Recording.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 57 Thursday, February 12, 2004 9:08 PM Satellite Receiver Users Enter the recording stop time. To timer-record a satellite broadcast using Manual Timer Programming: Press w e to select “STOP”, then press rt repeatedly to A Perform “Satellite Receiver Control Setting”...
  • Page 58: On-Disc Timer Programming

    Filename [DR-M10SE_08Recording.fm] Masterpage:Left+ DR-M10SE_01.book Page 58 Thursday, February 12, 2004 9:08 PM TIMER RECORDING (cont.) To make the disc for On-Disc Timer On-Disc Timer Programming Programming Load a disc. A Press x to open the disc tray. B Place a recordable disc on the disc tray. For details, refer to “Placing a Disc”...
  • Page 59 Filename [DR-M10SE_08Recording.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 59 Thursday, February 12, 2004 9:08 PM To timer-record the programme with Enter the recording stop time. the programmed disc Press w e to select “STOP”, then press rt repeatedly to set the desired stop time. Load the disc.
  • Page 60 Filename [DR-M10SE_08Recording.fm] Masterpage:Left+ DR-M10SE_01.book Page 60 Thursday, February 12, 2004 9:08 PM TIMER RECORDING (cont.) How discs are overwritten (Example 1) To record a 1-hour serial drama every Friday in SP mode Overwritten Overwritten Blank The first programme is The second programme overwritten by the third.
  • Page 61 Filename [DR-M10SE_08Recording.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 61 Thursday, February 12, 2004 9:08 PM Access the programme screen. CABLE/SAT STANDBY/ON Press rt to select the programme, then press ENTER. TV AV TV/CBL/SAT DVD 1 VIDEO Change a programme. Change the settings of the desired recording options as required.
  • Page 62 Filename [DR-M10SE_08Recording.fm] Masterpage:Left+ DR-M10SE_01.book Page 62 Thursday, February 12, 2004 9:08 PM TIMER RECORDING (cont.) When programmes overlap each other CABLE/SAT If “PROGRAM OVERLAPPED” appears, you have another STANDBY/ON programme overlapping the programme you have just made. TV AV TV/CBL/SAT Confirm with the arrow on “OK”, then press PROG/CHECK.
  • Page 63: Automatic Satellite Programme Recording

    Filename [DR-M10SE_08Recording.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 63 Thursday, February 12, 2004 9:08 PM Automatic Satellite ATTENTION: Be sure not to turn on the satellite receiver before the programme is executed; otherwise, the unit will start Programme recording when the satellite receiver’s power is turned on. If you have connected another appliance other than a satellite receiver to the L-2 IN/DECODER connector, be sure not to engage the Automatic Satellite Programme...
  • Page 64: Navigation

    Filename [DR-M10SE_09Navigation.fm] Masterpage:Left0 DR-M10SE_01.book Page 64 Thursday, February 12, 2004 9:08 PM NAVIGATION The Library Database DVD Navi enables you to search and Library Database select the desired programmes recorded on a DVD-RAM/R/RW disc very easily. You can record up to 99 programmes on a disc. DVD Navi Each time a programme is recorded on the disc, the information of the programme is registered for the Library Database DVD...
  • Page 65 Filename [DR-M10SE_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 65 Thursday, February 12, 2004 9:08 PM Using Library Database DVD Navi system, you can easily The display for original recording modify registered information, edit the programme or play list, as well as search for the beginning of each programme. About registration of information The following information is automatically registered for each programme when ordinary recording or timer recording is...
  • Page 66 Filename [DR-M10SE_09Navigation.fm] Masterpage:Left+ DR-M10SE_01.book Page 66 Thursday, February 12, 2004 9:08 PM NAVIGATION (cont.) Scan for Beginning(s) of Programme(s) You can scan the beginning of the programme easily with the Library Database DVD Navi. Turn on the TV and select the AV mode. Turn on the unit.
  • Page 67: Modify Original Information

    Filename [DR-M10SE_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 67 Thursday, February 12, 2004 9:08 PM Modify Index Modify Original Turn on the unit. Information Press DVD 1. Access the Index screen. A Press NAVIGATION. The Library Database DVD Navi screen appears. Turn on the TV and select the AV mode. B Press rt w e to move the arrow to “ORIGINAL”, Slide the TV/CABLE/SAT/DVD switch to DVD.
  • Page 68: Modify Category

    Filename [DR-M10SE_09Navigation.fm] Masterpage:Left+ DR-M10SE_01.book Page 68 Thursday, February 12, 2004 9:08 PM NAVIGATION (cont.) Modify Programme Name Modify Category Perform steps A to C of “Modify Index” ( Perform steps A to C of “Modify Index” ( pg. 67) before pg.
  • Page 69 Filename [DR-M10SE_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 69 Thursday, February 12, 2004 9:08 PM Delete programme Set edit-in and edit-out points. You cannot record any more with Library Database DVD Navi A Find the point where you once the registered programmes on the disc reach 99 want the deletion to programmes.
  • Page 70: Modify Play List Information

    Filename [DR-M10SE_09Navigation.fm] Masterpage:Left+ DR-M10SE_01.book Page 70 Thursday, February 12, 2004 9:08 PM NAVIGATION (cont.) Create Play List Modify Play List Turn on the unit. Information Press DVD 1. Load a disc. A Press x to open the disc tray. B Place a DVD-RAM or DVD-RW (VR mode) disc that Turn on the TV and select the AV mode.
  • Page 71: Move Scenes

    Filename [DR-M10SE_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 71 Thursday, February 12, 2004 9:08 PM Return to the normal screen. Confirm the addition. Press NAVIGATION. A Press w e to move the arrow to “PREVIEW”, then press ENTER to preview approximately 5 seconds NOTES: before and after the edited scene.
  • Page 72 Filename [DR-M10SE_09Navigation.fm] Masterpage:Left+ DR-M10SE_01.book Page 72 Thursday, February 12, 2004 9:08 PM NAVIGATION (cont.) Set edit-in and edit-out points. Start playback. A Find the point where you want the moved scene to Press 4 to start playback. The playback pictures appear begin, then press ENTER with the arrow on “IN”.
  • Page 73: Modify Category

    Filename [DR-M10SE_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 73 Thursday, February 12, 2004 9:08 PM Play back play list Delete play list Perform steps A to C of “Create Play List” ( Perform steps A to C of “Create Play List” ( pg. 70) before pg.
  • Page 74: Modify Library Information

    Filename [DR-M10SE_09Navigation.fm] Masterpage:Left+ DR-M10SE_01.book Page 74 Thursday, February 12, 2004 9:08 PM NAVIGATION (cont.) Scan for Programme from library Modify Library Turn on the unit. Information Press DVD 1. Access the library screen. A Press NAVIGATION. The Library Database DVD Navi Programme information can be registered in the unit’s memory screen appears.
  • Page 75 Programming. ( pg. 58) It is not possible to register discs formatted on devices other than JVC’s DVD recorders. It is not possible to register discs recorded on devices other than JVC’s DVD recorders. It is not possible to register discs when “SAVE AS LIBRARY” is set to “OFF”...
  • Page 76: Playback With Mp3/Jpeg Navigation

    Filename [DR-M10SE_09Navigation.fm] Masterpage:Left+ DR-M10SE_01.book Page 76 Thursday, February 12, 2004 9:08 PM NAVIGATION (cont.) Playback with MP3/JPEG Navigation This unit can play back discs that MP3 sound files and JPEG image files taken with digital still cameras or other devices are recorded. The MP3/JPEG Navigation enables you to search and select the desired files recorded on CD-R/RW or CD-ROM discs very easily.
  • Page 77 Filename [DR-M10SE_09Navigation.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 77 Thursday, February 12, 2004 9:08 PM Locating the desired group and tracks Programme Playback Load a disc. Perform steps A to D of “Locating the desired group and tracks” in the left column before continuing. A Press x to open the disc tray.
  • Page 78: Editing

    Filename [DR-M10SE_10Editing.fm] Masterpage:Left0 DR-M10SE_10Editing.fm Page 78 Friday, February 13, 2004 2:21 PM EDITING DV Dubbing CABLE/SAT STANDBY/ON TV AV TV/CBL/SAT You can dub programmes from a camcorder or DV equipment VIDEO connected to the unit with a DV cable. The unit’s remote control allows you the limited control of the connected camcorder or DV equipment functions during dubbing.
  • Page 79 Filename [DR-M10SE_10Editing.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 79 Thursday, February 12, 2004 9:08 PM To clear the “DV DUBBING” controller from the TV screen, Make connections. press ON SCREEN. Connect a camcorder or DV equipment to the DV IN Stop dubbing. connector on the unit’s front panel. Press 8 on the remote control.
  • Page 80: Edit From A Camcorder

    Filename [DR-M10SE_10Editing.fm] Masterpage:Left+ DR-M10SE_01.book Page 80 Thursday, February 12, 2004 9:08 PM EDITING (cont.) You can use a camcorder as the source player and your Edit From A unit as the recording deck. Slide the TV/CABLE/SAT/DVD switch to DVD. Camcorder Make connections.
  • Page 81: Edit To Or From Another Recorder

    Filename [DR-M10SE_10Editing.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 81 Thursday, February 12, 2004 9:08 PM You can use your unit as the source player or as the Edit To Or From recording deck. Slide the TV/CABLE/SAT/DVD switch to DVD. Another Recorder Make connections. Connect the player’s 21-pin SCART connector to the unit’s 21-pin SCART connector as illustrated.
  • Page 82: Output/Input Set

    Filename [DR-M10SE_10Editing.fm] Masterpage:Left+ DR-M10SE_01.book Page 82 Thursday, February 12, 2004 9:08 PM EDITING (cont.) Output/Input Set Select the output or input mode for the L-1 IN/OUT connector. A Press rt to move the Turn on the TV and select the AV mode. arrow to “L-1 OUTPUT”...
  • Page 83 Filename [DR-M10SE_10Editing.fm] Masterpage:Right-No-Heading DR-M10SE_10Editing.fm Page 83 Friday, February 13, 2004 6:41 PM L-2 Select Setting (L-2 SELECT) Return to the normal screen. Set “L-2 SELECT” to the appropriate mode depending on the Press SET UP. type of appliance connected to the unit’s L-2 IN/DECODER connector.
  • Page 84: Digital Audio Dubbing

    Filename [DR-M10SE_10Editing.fm] Masterpage:Left+ DR-M10SE_01.book Page 84 Thursday, February 12, 2004 9:08 PM EDITING (cont.) You can dub selected audio from a DVD or Audio CD disc to a Digital Audio digital audio device. However, it is not possible to dub copy-protected discs. Example: Dubbing to an MD Dubbing Make connections.
  • Page 85: Remote Control Functions

    “4” for 4. Remote 1/2/3/4 Code Switching Set the remote control code. The remote control is capable of controlling four JVC video units Press ENTER to set the code. independently. Each of the units can respond to one of four codes (1, 2, 3 or 4).
  • Page 86 Your remote control can operate the basic functions of your TV Keep pressing SET UP down during step A. set. In addition to JVC TVs, other manufacturer’s TVs can also be Enter your TV’s brand code using the number keys, then controlled.
  • Page 87 66, 84, 101 Although the provided remote control unit is compatible with RADIX JVC satellite receivers, as well as many other models, it may not work with your satellite receiver, or in some instances, may have SABA limited function capability.
  • Page 88: System Connections

    Filename [DR-M10SE_10Editing.fm] Masterpage:Left0 DR-M10SE_01.book Page 88 Thursday, February 12, 2004 9:08 PM SYSTEM CONNECTIONS Connecting To A Satellite Receiver Simple Connections NOTES: Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 83) This is an example of a simple connection if your TV has You can use the Automatic Satellite Programme Recording one 21-pin AV input (SCART) connector.
  • Page 89 Filename [DR-M10SE_10Editing.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 89 Thursday, February 12, 2004 9:08 PM Perfect Connections (Recommended) NOTES: Set “L-2 SELECT” to “VIDEO” or “S-VIDEO”. ( pg. 83) This is an example of recommended connections if your You can use the Automatic Satellite Programme Recording TV has two 21-pin AV input (SCART) connectors.
  • Page 90: Connecting/Using A Decoder

    Filename [DR-M10SE_10Editing.fm] Masterpage:Left+ DR-M10SE_01.book Page 90 Thursday, February 12, 2004 9:08 PM SYSTEM CONNECTIONS (cont.) The L-2 IN/DECODER connector can be used as an input Connecting/Using connector for an external decoder (descrambler). Simply connect a decoder and you can enjoy a variety of programming that is available through scrambled A Decoder channels.
  • Page 91: Connecting To A Dolby Digital Decoder Or An Amplifier With Built-In Dts

    Filename [DR-M10SE_10Editing.fm] Masterpage:Right-No-Heading DR-M10SE_10Editing.fm Page 91 Friday, February 13, 2004 2:22 PM Connecting To A Dolby Digital Decoder Or An Amplifier With Built-in DTS These instructions enable you to connect your unit to a Dolby Digital decoder or an amplifier with built-in DTS. DIGITAL OUT DIGITAL OUT (COAXIAL)
  • Page 92: Subsidiary Settings

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left0 DR-M10SE_01.book Page 92 Thursday, February 12, 2004 9:08 PM SUBSIDIARY SETTINGS Various modes of this unit are categorized into menus nested in Mode Set 2 levels shown in the following table. To change the settings of these modes, find the desired mode in the menu (for details on each menu, see pages 93 through 96), then follow the procedure below.
  • Page 93: Audio Output

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 93 Thursday, February 12, 2004 9:08 PM AUDIO OUTPUT (The boldface settings in the table below indicate the settings at your purchase.) 8 DIGITAL AUDIO OUT Set to the appropriate mode according to the type of the device connected to DIGITAL OUT connector.
  • Page 94 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_01.book Page 94 Thursday, February 12, 2004 9:08 PM SUBSIDIARY SETTINGS (cont.) RECORDING SET (The boldface settings in the table below indicate the settings at your purchase.) 8 SAVE AS LIBRARY When this function is set to “ON”, the recording information is automatically stored in the library.
  • Page 95: Display Set

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SE_11Subsidiary.fm Page 95 Friday, February 13, 2004 2:23 PM DISPLAY SET (The boldface settings in the table below indicate the settings at your purchase.) 8 SUPERIMPOSE You can select the modes of indications superimposed on the TV screen. OFF: To turn off superimposed indications.
  • Page 96 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_11Subsidiary.fm Page 96 Friday, March 5, 2004 2:32 PM SUBSIDIARY SETTINGS (cont.) OTHERS (The boldface settings in the table below indicate the settings at your purchase.) 8 AUTO TIMER When this function is set to “ON”, the timer is automatically engaged when the unit power is turned off, and automatically disengaged when the unit is powered back on.
  • Page 97: Show View

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 97 Thursday, February 12, 2004 9:08 PM System Setup ® IMPORTANT: Normally, Auto Set Up ( pg. 19), Preset Download ( pg. 21) or Auto Channel Set ( pg. 98) sets the Guide Program numbers automatically.
  • Page 98: Tuner Set

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_01.book Page 98 Thursday, February 12, 2004 9:08 PM SUBSIDIARY SETTINGS (cont.) Your unit needs to memorise all necessary stations in channel Tuner Set positions in order to record TV programmes. Auto Channel Set automatically assigns all receivable stations in your area to call them up by using the PR +/–...
  • Page 99 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 99 Thursday, February 12, 2004 9:08 PM Manual Channel Set View the Confirmation screen. Store channels that were not stored during Auto Set Up “SCAN COMPLETED” is pg. 19), Preset Download ( pg. 21) or Auto Channel Set displayed on the TV screen.
  • Page 100 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_01.book Page 100 Thursday, February 12, 2004 9:08 PM SUBSIDIARY SETTINGS (cont.) Delete A Channel Select the band. A Press rt to select Perform steps A and B of “Manual Channel Set” on page 99 “BAND”, then press to access the Confirmation screen before continuing.
  • Page 101 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 101 Thursday, February 12, 2004 9:08 PM When Receiving A Scrambled Set Stations (A) Broadcast Set station names that are registered in your unit. Perform steps A and B of “Manual Channel Set” on page 99 Select the decoder mode.
  • Page 102 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_01.book Page 102 Thursday, February 12, 2004 9:08 PM SUBSIDIARY SETTINGS (cont.) Set Stations (B) Fine-Tuning Channels Already Stored Set station names other than the ones registered in your unit. Perform steps A and B of “Manual Channel Set” on page 99 Perform steps A and B of “Manual Channel Set”...
  • Page 103: Tv Station And Id List

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right 3Column DR-M10SE_01.book Page 103 Thursday, February 12, 2004 9:08 PM TV Station And ID List STATION NAME STATION NAME STATION NAME 1000 TV1000 JIM TV SHOW SHOW 3SAT 3SAT JSTV JSTV SOCIEDADE 9LIV 9LIVE SKY CHANNEL KAB1 KABEL1 SKYN SKY NEWS...
  • Page 104: Clock Set

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_01.book Page 104 Thursday, February 12, 2004 9:08 PM SUBSIDIARY SETTINGS (cont.) Clock Set IMPORTANT: If you performed Auto Set Up ( pg. 19) or Preset Download ( pg. 21), without ever having set the clock previously, the unit’s built-in clock is also set automatically. Perform the following steps only if —...
  • Page 105 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 105 Thursday, February 12, 2004 9:08 PM NOTES: Set Just Clock. Just Clock (when set to “ON”) adjusts the unit’s built-in clock every hour, except for 23:00, 0:00, 1:00 and 2:00. The default setting is “OFF”. Just Clock is not effective when: A Press rt to select “JUST CLOCK”, then press ENTER.
  • Page 106: Format A Disc

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_11Subsidiary.fm Page 106 Friday, February 13, 2004 2:23 PM SUBSIDIARY SETTINGS (cont.) Format a DVD-RAM disc Format A Disc Access the Main Menu screen. Press SET UP. Some DVD-RAM/RW discs are unformatted. Format the disc when you use an unformatted disc or you want Access the “UTILITY”...
  • Page 107: Finalise A Disc

    Although DVD-R/RW discs finalised on this unit become playable on DVD players compatible with DVD-R/RW discs, Cancel the disc finalisation. some discs still may not play, for which JVC cannot take responsibility. A Press rt to select “CANCEL DISC FINALISATION”, Marked points marked before finalising will be deleted, and then press ENTER.
  • Page 108: Scan Mode Set

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_11Subsidiary.fm Page 108 Friday, February 13, 2004 4:07 PM SUBSIDIARY SETTINGS (cont.) Scan Mode Set Tray Lock You can select the scan mode from two modes: Interlaced You can lock the disc tray to prohibit the unwanted disc scan mode which is used in the conventional TV system, ejection by children.
  • Page 109: Troubleshooting

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right0 DR-M10SE_01.book Page 109 Thursday, February 12, 2004 9:08 PM TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can solve the trouble yourself. Small problems are often easily solved, and this can save you the trouble of sending your unit off for repair. GENERAL SYMPTOM POSSIBLE CAUSE...
  • Page 110 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_11Subsidiary.fm Page 110 Friday, March 5, 2004 5:17 PM TROUBLESHOOTING (cont.) RECORDING SYMPTOM POSSIBLE CAUSE CORRECTIVE ACTION 1. The desired programme cannot be The channel position does not Set the correct channel position for the recorded. correspond to that in the receiving area. receiving broadcast.
  • Page 111 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right-No-Heading DR-M10SE_01.book Page 111 Thursday, February 12, 2004 9:08 PM ON-SCREEN MESSAGES MESSAGE DESCRIPTION MEMORY IS FULL The memory is full for registration for the Navigation system. The NOTHING MORE CAN BE REGISTERED IN THE LIBRARY recording cannot be started even though the capacity for the IF YOU DELETE UNNECESSARY TITLE INFORMATION, recording is enough.
  • Page 112 Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left+ DR-M10SE_01.book Page 112 Thursday, February 12, 2004 9:08 PM TROUBLESHOOTING (cont.) ON-SCREEN MESSAGES (cont.) MESSAGE DESCRIPTION PRESS [STOP] AGAIN TO STOP RECORDING During Live Memory playback, 8 has been pressed. ( pg. 38) TIMER RECORDING COMPLETED Timer recording has finished during Live Memory playback. PLAYBACK WILL STOP Timer recording finished during Live Memory playback, then the THEN TIMER RECORDING WILL START...
  • Page 113: Glossary

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Right0 DR-M10SE_01.book Page 113 Thursday, February 12, 2004 9:08 PM GLOSSARY 8 Aspect ratio 8 Multiangle The ratio of vertical and horizontal sizes of a displayed image. By recording multiple scenes progressing at the same time in a The horizontal vs.
  • Page 114: Specifications

    Filename [DR-M10SE_11Subsidiary.fm] Masterpage:Left0 DR-M10SE_11Subsidiary.fm Page 114 Friday, February 13, 2004 2:40 PM SPECIFICATIONS GENERAL Input/Output S-video input Power requirement : AC 220 V – 240 V , 50 Hz/60 Hz : 0.8 – 1.2 Vp-p, 75 ohms Power consumption : 0.2 – 0.4 Vp-p, 75 ohms Power on : 33 W S-video output...
  • Page 115: List Of Terms

    Filename [DR-M10SE_01IX.fm] Masterpage:Right0 DR-M10SE_01.book Page 115 Thursday, February 12, 2004 9:08 PM LIST OF TERMS ..........43 ..........46 A-B Repeat Playback Random Playback ........45 ........5 Adjusting the picture quality Recordable/playable discs ............ 33 ........ 7 Angle Selection Recording Medium and Format ........
  • Page 116 Filename [DR-M10SE_13Cov4.fm] DR-M10SE_13Cov4.fm Page 116 Friday, March 5, 2004 4:30 PM MUTING PQRS CANCEL VCR Plus+ PROG TOP MENU MENU PREVIOUS SLOW REC MODE LIVE SET UP DIS AUDIO SUB Printed in Germany 0304MNH-ID-VE Page 116 March 5, 2004 4:29 pm...

This manual is also suitable for:

Dr-m7s

Table of Contents