Scan Modeset; Ray I.ock - JVC DR-M10 Instructions Manual

EN103
Scan ModeSet
You can select the scan mode from two modes: Interlaced
scan mode which is used in the conventional TV system,
and Progressive scan mode which enables reproduction
of higher-quality images. For details, refer to
"G[OSSARY" (_-_¢pg. 108).
TrayLock
You call lock the disc tray to prohibit the unwanted disc
ejection by children.
I oTurn off the unit. ]
• Turn on the unit.
• Turn on the TV and select the AV mode.
• Slide the IV/CAB[E/DBS/DVD switch to DVD.
ATTENTION:
Your TV needs to be compatible with Progressive.
Set the scanmode.
Press PROGRESSIVE SCAN for 3 or more seconds.
• Vide() output indicator (_l) lights on the front display panel if
Progressive scan mode has been established. (_z_ _ pg. 15)
• Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
• Interlaced scan mode is the setting at your purchase.
• Interlace(] scan mode might be suitable depending on video
material.
• Scan mode cannot be set while menu screen is displayed.
Lock the disctray.
While the unit is turned off, press and hold II, then press
A on the unit. "[ OCK" appears on the front display
paneh
• If you try to eject the discs, "LOCK" appears an(] indicates that
tray is locke(].
To unlock tray
While the unit is turned off, press and hold II, then press
A on the unit. "UNLOCK" appears on the display panel.