JVC DR-M10 Instructions Manual page 69

TV_DVD
TOP MEr_U r_'I_ION
MENU nE_U_N
PREW0US
SLOW= pLay,SElECTSL0_
DVi)cb!I
_1 Access the programscreen.
Press i\V to select the program, then press ENTER.
_ Changea program.
Change the settings of the desired recording options as
required.
• Refer to steps [] - [] in "Manual Timer Programing"
(_ pg. 64).
_'_ Complete timer correction.
Press PROG/CHECK.
• The previous screen resumes.
_J Engage the unit'stimer mode.
For VCR Plus+ or Manual Timer Programing
ReC_IODE LI'_EOHECK _ _
o oqo,%,
SETUP
000®
dVC
Check, cancel andchange p rograms
Disengage t he timer mode.
When "®" lights on the front display panel
Press Q ITIMER), then press DVD cb/k
When "_(_" lights on the front display panel
Press DVD O/i.
when "R-LK" lights on the front display panel
Press REC LINK, then press DVD (b/[.
_ Access ProgramCheck screen.
PressPROG/CHECK,
• To return to
the
previous
screen after you check the
program, press PROG/CHECK
again.
To cancel the program
Press/\V repeatedly to
select a program to be
cancelled, then press X.
Press ® (TIMER).
For On-Disc Timer Programing
Press DVD tb/I.
For Satellite Auto recording
Press REC LINK for 2 seconds or more.
Program's information on the front display panel
You can check the details of the programs even when the
power is turned off. (It is necessary that the Power Save mode
(_-_ pg. 99, "POWER SAVE") is disengaged or the unit is not
in timer standby mode.) However, it is not possible to cancel
or change the program's setting.
[] Press PROG/CHECK.
• "NEW PROG" or "P-1" (if 8 programs have already been
set) appears.
[] Press/\V repeatedly until the desired program number
("P-1" to "P-8") appears, then press ENTER.
[] Press _.
• Each time you press L >, the indication changes as follows
(the settings in parentheses are examples):
Date ("DATE 03.08SU') -'_ Start time ("ON 11:00") -_ Stop
time ("OFF 11:30") -_ Channel ("CH 1 ") -'_ Weekly/Daily
("MO-FR DAILY") -_ Program number ("P-1 ") an(] Recording
speed (SP) -'_ (Back to the beginning)
[] Press PROG/CHECK to complete checking.
• The normal display resumes.