JVC DR-M10 Instructions Manual page 74

4EN NAVIGATION (cont.)
Scan for Beginning(s) of Program(s)
You can scan the beginning of the program easily with the
Library Database DVD Navi.
• Turn oil the TV and select the AV mode.
• Slide the TV/CABLE/DBS/DVD switch to DVD.
SELECT
@
CLEAR
PREVIOUS
_'%_"" ' LECT StOVe+
SETUP
000_
JVC
DVDG![
NAVIGATION
Turnon the unit.
On the unit
Press G/i.
On the Remote
Press DVD t5/I.
I_1 Loada disc.
[] Press A to open the disc tray.
[] Place a recorded disc on the disc tray.
• For details, refer to "Placing a Disc" i_-<"pg. 11).
[] Press A to close the disc tray.
I_1 Access the Indexscreen.
[] Press NAVIGATION. ]he
library Database DVD
Navi screen appears.
[] Press/",V <[ _" to move
the arrow to "ORIGINAl/',
then press ENTER.
L_e Selecttheprogram(s).
Press _ _" to move the arrow on the index (small still
pictures) of the desired program.
• When you want the plural
programs to be played back
continuously, press MEMO
after selecting the desired
program. The numbers of the
playback order appear on the
index. You can select up to ..... i -_J _r _,J _ ;'_)'_fJ
30 programs.
• When you want to correct
the order, move the arrow on the desired index and press
MEMO. The number disappears and the unit re-numbers the
other programs automatically.
• When you want to cancel the order, press CLEAR.
_ Start playback.
Press ENTER. Or simply press SELECT. The playback
starts.
Pauseplayback.
Press II.
• To resume normal playback, press I_.
_Stop playback.
Press II.