Playback Operations; Basic Playback - JVC DR-M10 Instructions Manual

Basic P layback
• lurn oil the unit.
• Turn oil the TV and select the AV mode.
• Slide the TV/CABtE/DBS/DVD switch to DVD.
l
(U_) CTZ) CTZ) _
VCR Plu> PnogeHg, KnEg LINK TIMER
PREVIOUg
SLOW- pLAYBELECT SLO_I
000_
..IVC
@ ||
To play back an MP3!JPEG disc, see "Playback with MP3/JPEG
Navigation" (_7 _ pg. 84).
Loada disc.
[] Press A to open the disc tray.
[] Place the disc on the disc tray.
• For details, refer to "Placing a Disc" (_ pg. 11).
[] Press A to close the disc tray.
• Pressing I_ also closes the disc tray.
• Playback begins automatically if an auto-playback DVD disc is
loaded.
_ Start playback.
Press I_.
• If you load a DVD disc whose region code does not match the
unit, "REGION CODE ERROR" appears on the TV screen. For
details, refer to "Region Number" (_-€" pg. 8).
• With Video CD/SVCD discs with PBC control or some DVD
discs, the menu display may appear on the TV screen after
starting playback. In this case, select an item which you want
to play back from the menu. Otherwise, the playback cannot
go forward. Refer to "l.ocating a desired scene using the menu
of a Video CD/SVCD with PBC" (_-_" pg. 40) or "l.ocating a
desired scene using the DVD menu" (_-_" pg. 36).
• The Library Database DVD Navi also enables you to search
and select the desired programs. {_ pg. 72)
I_1 Pauseplayback.
Press II.
• To resume normal playback, press I_.
Stopplayback.
Press II.
• When a recordable disc is played, playback stops and a
program received with the unit's tuner resumes on the TV
screen.
• When a playback-only disc is played, playback stops and the
still image at the time you press • remains on the lV screen.
Pressing • again resumes a program received with the unit's
tuner.
• If A is pressed during playback, playback stops, then the disc
tray opens.
NOTE:
When the Library Database DVD Navi screen appears, choose a
thumbnail image of the desired program on the TV screen, then
press SELECT or ENTER. (_ pg. 74)
ATTENTION:
• It takes approximately 30 seconds to read a disc depending
on the type and condition of the disc since this unit is
multi-disc compatible (DVD-RAM, DVD-RW, DVD-R). It
may even take several minutes when a disc is dirty,
scratched or warped.
• It may take a few seconds to start playback. [his is not a
malfunction.
• Forward/reverse high-speed search and other operations
cannot be performed while playback is stopped.