Making One-Sided Copies From Two-Sided Originals (2 1-Sided) - Canon imageCLASS 2220 Copying Manual

Making One-Sided Copies from Two-Sided Originals
(2 1-Sided)
This feature automatically turns over two-sided originals that are placed in the
feeder, to make one-sided copies.
1
Original
IMPORTANT
Place the originals horizontally when copying LTRR and STMTR originals. If these
originals are placed vertically, the back sides of the copies will be printed upside down.
NOTE
To copy two-sided originals placed on the platen glass, use the Job Build mode. (See
"Job Build," on p. 2-55.)
1
1-82 Two-Sided Copying (Two-Sided)
Place your originals in the feeder © press [Two-sided].
NOTE
If Auto Collate is set to 'On', the Collate mode or Offset Collate mode is
automatically set when you place the originals in the feeder. (See "Setting
Automatic Collate," on p. 3-6.)
Copies