Image Separation - Canon imageCLASS 2220 Copying Manual

Image Separation

This mode automatically divides an original into equal sections, and copies each
section in an enlarged form onto a separate sheet.
The following two Image Separation features are available: 1 to 2 (1-sided and
2
2-sided copies), and 1 to 4 (1-sided and 2-sided copies).
IMPORTANT
•
When the machine is operating in the Image Separation mode, you cannot use the Entire
Image, Saddle Stitch, Two-sided, Two-page Separation, Cover/Sheet Insertion, Image
Combination, Shift (No. Key Entry), Booklet, Transparency Interleaving, Different Size
Originals, Frame Erase, Image Repeat, or Form Composition modes.
•
If you use the Remote or Cascade Copy mode while the machine is operating in the
Image Separation mode, you cannot set a pattern for the last page of the original.
•
Originals copied using the Image Separation mode must all be the same size. You cannot
use the Different Size Originals mode in combination with the Image Separation mode.
•
Place the original on the platen glass. You cannot copy an original in the Image
Separation mode from the feeder.
NOTE
The enlargement ratio is automatically set to match the designated paper size.
I
1 To 2
Divides a one-sided original into two equal sections, and outputs the sections in an
enlarged form as two 1-sided copies or one 2-sided copy.
NOTE
You can place LTR originals horizontally or vertically when using this feature. When
placed vertically, each page is divided into upper and lower sections.
2-46

Image Separation

Original
1
2
Copies
or
1
2
1