Canon imageCLASS 2220 Copying Manual page 54

2
Set the copy ratio by pressing [–] or [+] © press [Done].
You can also enter values using
If you enter the value using
value by pressing [–] or [+].
If you enter a value outside the setting range, a message prompting you to enter
the appropriate value appears on the screen.
The display returns to the Copy Basic Features screen, and the selected copy
ratio is displayed.
NOTE
If you make a mistake when entering a value, press
value.
3
Press (Start).
Copying starts.
NOTE
•
To return the copy ratio to 100%, press [Direct].
•
To cancel all settings and return the machine to the Standard mode,
press (Reset).
- (numeric keys).
0 9
- (numeric keys), you can change the entered
9
0
C
Changing the Copy Ratio (Copy Ratio)
(Clear) © enter the correct
1-43
1