Canon imageCLASS 2220 Copying Manual page 65

1
5
1-54 Changing the Copy Ratio (Copy Ratio)
NOTE
•
If you make a mistake when entering values, press [C] on the touch panel display
© enter the correct values.
•
To specify the same values for the X and Y axes, press [Zoom].
•
If you want to enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
and (Clear).
C
•
For details on how to enter the values in inches, see Chapter 1, "Before You Start
Using This Machine," in the Reference Guide.
Press (Start).
Copying starts.
NOTE
•
To return the copy ratio to 100%, press [Direct].
To cancel this setting, press [Copy Ratio] © [Zoom Program] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode,
press (Reset).
- (numeric keys)
0 9