Canon imageCLASS 2220 Copying Manual page 138

NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
2
Select the desired margin type © enter the margin width.
IMPORTANT
•
If you are using the Margin and Two-sided modes together and copying an original
that already has a margin, follow the instructions below:
- 1 2-Sided: Set the margin for the back only.
- 2 2-Sided: You do not need to set a margin. Proceed to make copies in the usual
way.
- 2 1-Sided: Set the margin for the back only.
•
If you are using the Margin and Two-sided modes together and copying an original
that does not have a margin, follow the instructions below:
- 1 2-Sided: Set the margin for both the front and back.
- 2 2-Sided: Set the margin for both the front and back.
- 2 1-Sided: Set the margin for both the front and back.
NOTE
•
If you want to enter values in millimeters, press [mm].
•
The default setting is '3/8" (10 mm)'.
Making Copies with Margins (Margin)
2
2-27