Collating Copies (Finisher) - Canon imageCLASS 2220 Copying Manual

Collating Copies
The Finisher mode can be selected to collate copies in various ways, either by
1
pages or copy sets. The copied paper is output face down.
NOTE
•
When envelopes, tracing paper, transparencies, or labels are selected, the Finisher
functions cannot be set.
•
When heavyweight paper, letterhead, or bond is selected, the Staple or Hole Punch
mode cannot be set.
Below is a list of the finishing functions and paper sizes available for each optional unit.
Optional units
Finisher-J1
Inner 2way Tray-A1
Copy Tray-F1
Saddle Finisher-
Puncher Unit-
*1 If Tray A is selected as a designated tray from the Additional Functions screen © Common Settings © Tray
Designation screen, Offset is applied. If it is not selected, Rotate is applied.
*2 Stapling position cannot be selected.
1-60

Collating Copies (Finisher)

(Finisher)
Offset
None –
11" x 17",
LGL,
LTR,
LTRR,
STMT
–
*1
G1
11" x 17",
LGL,
LTR,
LTRR,
K1
STMT
: Setting available –: Setting unavailable
Rotate
Corner
LTR,
LTRR, –
STMT,
STMTR
*2
11" x 17":
15 sheets;
– LGL: 20
sheets;
LTR, LTRR:
30 sheets
LTR,
LTRR, –
STMT,
STMTR
*1
LTR, 11" x 17", 11" x 17",
LTRR, LGL:
STMT, 25 sheets; 25 sheets;
STMTR LTR, LTRR: LTR, LTRR:
50 sheets 50 sheets
Staple
Hole Punch
Double Saddle Stitch
– –
– –
– –
11" x 17",
LGL: LTRR:
10 sheets
LGL, LTRR:
–
–
–
–
11" x 17",
LTR:
3 holes;
2 holes