2
2
3
2-60
E-mail Notification at the End of a Copy Job (Job Done Notice)
Select the destination of the Job Done Notice © press [OK] ©
[Done].
If Access Number Management for an Address Book is set to 'On', press
[Access Number] © enter the access number using
press [OK]. If you do not want to specify an access number, press [No Access
Number]. (See Chapter 4, "Registering/Editing the Address," in the Sending and
Facsimile Guide.)
If the desired destination is not displayed, press [M] or [L] to scroll to the
desired destination.
The selected mode is set, and the display returns to the Copy Basic Features
screen.
NOTE
•
For more information on sending documents, see Chapter 1, "Various Sending
Methods," in the Sending and Facsimile Guide.
•
You cannot select multiple destinations.
Press
(Start).
Copying starts.
Once copying is complete, a job done notice is sent to the selected destination.
NOTE
To cancel the settings, press [Special Features] © [Job Done Notice] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode,
press
(Reset).
(numeric keys) ©
-
0
9