Canon imageCLASS 2220 Copying Manual page 80

When you want hole punches made, press [Hole Punch].
G If you select [Rotate]:
❑
Press [Next] © select [Auto], [LTR], [LTRR], [STMT], or [STMTR] paper.
IMPORTANT
[Rotate] can only be selected in the following cases:
- When the available paper size is selected manually
- When the available paper size is loaded in both the horizontal and vertical
directions
- The selected paper source must have Drawer Eligibility for APS/ADS set to 'On'.
(See Chapter 3, "Customizing Settings," in the Reference Guide.)
3
Press [OK].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
IMPORTANT
If you select [Auto] after selecting Rotate, make sure you select a paper size that
can be rotated. If you do not, the paper might not be rotated and collated. A4, A4R,
A5 and A5R papers can be rotated.
4
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display © press
scanning is complete, press [Done].
Copying starts.
NOTE
To cancel this setting, press [Finisher] © [Cancel].
•
•
To cancel all settings and return the machine to the Standard mode,
press (Reset).
(Start) once for each original. When
Collating Copies (Finisher)
1
1-69