Changing The Copy Ratio (Copy Ratio); Enlarging/Reducing Originals To A Standard Size (Preset Zoom) - Canon imageCLASS 2220 Copying Manual

Changing the Copy Ratio
You can set the machine to adjust the copy ratio automatically, or you can manually
specify the copy ratio for a copy job.
Enlarging/Reducing Originals to a Standard Size
(Preset Zoom)
You can enlarge or reduce standard sized originals to a different standard paper
size.
IMPORTANT
•
Place your originals horizontally in the following cases:
- When enlarging LTR originals to 11" x 17" or LGL paper.
- When enlarging STMT originals to 11" x 17" paper.
•
When reducing 11" x 17" and LGL originals to LTR with Auto Orientation set to 'Off', load
LTRR paper into paper drawer 3 or 4, or into the stack bypass.
NOTE
Placing an original horizontally, means placing the original with the longer side
horizontally.
I Reduce
The preset copy ratio when reducing copies is as follows:
LGL ©LTR (78%)
•
11" x 17" © LGL, 11" x 15" © LTR (73%)
•
11" x 17" © LTR (64%)
•
11" x 17" © STMT (50%)
•
• Minimum ratio (25%)
I Enlarge
The preset copy ratio when enlarging copies is as follows:
•
Maximum ratio* (800%)
•
STMT ©11" x 17" (200%)
•
LTR © 11" x 17" (129%)
•
LGL © 11" x 17" (121%)
•
*Only when placed on the platen glass
(Copy Ratio)
(400%)

Changing the Copy Ratio (Copy Ratio)

1
1-39