Canon imageCLASS 2220 Copying Manual page 168

4
When scanning is complete, place your next batch of
originals © press
If you want to change the scan settings, make the changes before
pressing (Start).
•
You can adjust the copy exposure and the image quality. (See "Adjusting
Exposure and Image Quality (Copy Exposure)," on p. 1-33.)
•
You can change the original type setting (One-sided/Two-sided). (See
"Two-Sided Copying (Two-Sided)," on p. 1-75.)
•
You can change the number of copy sets. (See "Entering the Copy Quantity," on
p. 1-17.)
If you are scanning two-sided originals, press [2-Sided Original].
(Start).
2
Job Build 2-57