•
If you select [Double] (Left Staple):
Originals
1
•
If you select [Saddle Stitch]:
Originals
IMPORTANT
•
You cannot select the position to be stapled when the Finisher-J1 (optional) is attached.
(See Chapter 8, "Appendix," in the Reference Guide.)
•
When the machine is operating in the Saddle Stitch mode, you cannot use the Remote or
Cascade Copy, Hole Punch, Two-page Separation, Cover/Sheet Insertion, Image
Combination, Image Separation, Booklet, Transparency Interleaving, Form Composition,
or Page Numbering modes.
•
Folds may appear differently depending on the type or quantity of paper.
NOTE
•
Place the originals to be finished into a booklet in page order, as shown in the illustration
above. (See "Making Copies for Use as a Booklet (Booklet)," on p. 2-13.)
•
[Saddle Stitch] can only be set when the 1 2-Sided or 2 2-Sided mode is selected.
(See "Two-Sided Copying (Two-Sided)," on p. 1-75.)
1-62
Collating Copies (Finisher)
Three Copies of
Each Page Collated
in Page Order
1
2
3
4
Copy Set 1
Three Copies of
Each Page Collated
in Page Order
8
1
6
3
Copy Set 1
Copy Set 2
Copy Set 2
Copy Set 3
Copy Set 3