Canon imageCLASS 2220 Copying Manual page 144

If you press [Adjust Each Dim.], select the frame erase border(s) © press [–] or
[+] to set their respective frame erase width(s) © press [Next].
To return to the screen for setting the same width for all four borders, press
[Adjust All At Once].
NOTE
•
If you want to enter values in millimeters, press [mm].
•
When entering values in millimeters, you can also use
(Clear) to clear your entries.
C
•
If you enter the value using
value by pressing [–] or [+].
•
If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
•
The default setting is '1/8" (4 mm)' for each side. The maximum frame erase width
is '1 15/16" (50 mm)'.
Erasing Shadows and Frame Lines from Copies (Frame Erase)
- (numeric keys), you can change the entered
9
0
- (numeric keys) and
0 9
2-33
2