Canon imageCLASS 2220 Copying Manual page 61

2
1
3
1-50 Changing the Copy Ratio (Copy Ratio)
Press [Zoom Program].
Use the numeric keys on the touch panel display to enter
values for the original size and copy size.
❑
Press [Original Size] © enter a value.
❑
Press [Copy Size] © enter a value.
❑
Press [OK].
You can enter either the width or the length of the original size. Make sure to
enter the same type of measurement for the copy size. (For example, if you
enter the width of the original for [Original Size], enter the width of the copy for
[Copy Size].)
Place the original on the platen glass if the zoom ratio is more than 400%.
The machine automatically calculates the correct copy ratio based on the values
you entered. However, the original image may be cut off slightly on the copy
depending on the paper size.