Automatically Setting The Copy Ratio Based On The Original And Copy Paper Sizes (Auto) - Canon imageCLASS 2220 Copying Manual

Automatically Setting the Copy Ratio Based on the
Original and Copy Paper Sizes (Auto)
The machine automatically selects the appropriate copy ratio based on the size of
the originals and the selected copy paper. The available copy ratios are from 25%
to 800% when the original is placed on the platen glass, and from 25% to 400%
1
when the original is placed in the feeder.
IMPORTANT
•
When the machine is operating in the Auto Copy Ratio mode, you cannot use the
Automatic Paper Selection and Image Repeat (Auto) modes.
•
You cannot copy highly transparent originals, such as transparencies, in the Auto Copy
Ratio mode. Use the Preset Zoom or Zoom Designation modes.
•
To use the Auto Copy Ratio mode, your originals must conform to a standard paper size:
11" x 17", LGL, LTR, LTRR, STMT, or STMTR.
NOTE
If an error occurs between the Auto Copy Ratio and the actual copy size, you can
compensate for this error with the Zoom Fine Adjustment function. (See Chapter 3,
"Customizing Settings," in the Reference Guide.)
1-44 Changing the Copy Ratio (Copy Ratio)
Original
Copy