Original Frame Erase - Canon imageCLASS 2220 Copying Manual

Original Frame Erase

1
2
2
2-32 Erasing Shadows and Frame Lines from Copies (Frame Erase)
Place your originals © press [Special Features] © [Frame
Erase].
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
Press [Original Frame Erase] © set the frame erase width by
pressing [–] or [+] © press [Next].
The frame erase area is erased evenly (based on the value you set) around each
edge of the original. To set different frame erase width values for the top, left,
right, and bottom sides of the original independently, press [Adjust Each Dim.].