Transparency Interleaving - Canon imageCLASS 2220 Copying Manual

Transparency Interleaving

Use this mode when copying onto transparencies which are fed from the stack
bypass. The machine automatically interleaves a sheet of paper between each
transparency. The interleaf sheets protect the copied surface of the transparencies.
They can also be printed with the same images as the transparencies or left blank.
2
IMPORTANT
•
When the machine is operating in the Transparency Interleaving mode, you cannot use
the Remote or Cascade Copy, Finisher, Two-sided, Two-page Separation, Cover/Sheet
Insertion, Image Combination, Image Separation, Booklet, Image Repeat, Mirror Image,
Form Composition, or Page Numbering modes.
•
You cannot make more than one set of copies at a time in the Transparency Interleaving
mode.
•
Even if your machine is equipped with the Finisher (optional), you cannot use any of the
Finisher modes with the Transparency Interleaving mode.
NOTE
•
The machine's counter does not count blank interleaf sheets as copies.
•
Transparencies are output into Tray A when only the Inner 2way Tray-A1 is attached, and
into Tray B in the case of the Saddle Finisher-G1, even if the other tray is specified as a
designated tray.
I
Blank Interleaf Sheets Selected in the Transparency Interleaving Mode:
Outputs a printed transparency and a blank interleaf sheet alternately.
Originals
R E P O R T
2-18

Transparency Interleaving

R E P O R T
Blank Interleaf
Sheets
Copies
Transparencies