Canon imageCLASS 2220 Copying Manual page 164

1
Place your originals in the feeder © press [Special Features]
© [Different Size Originals].
NOTE
•
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
•
If Auto Collate is set to 'On', the Collate mode or Offset Collate mode is
automatically set when you place the originals in the feeder. (See "Setting
Automatic Collate," on p. 3-6.)
2
Select either [Same Width] or [Different Width] © press [OK] ©
[Done].
If you set originals with the same width, press [Same Width].
If you set originals with different widths, press [Different Width].
The selected mode is set, and the display returns to the Copy Basic Features
screen.
Different Size Originals
2
2-53