Cover/Sheet Insertion - Canon imageCLASS 2220 Copying Manual

Cover/Sheet Insertion

This mode enables you to program the machine to automatically add front and back
covers, sheet insertions, or chapter pages using a different type of paper stock from
that used for the document. In addition, you may also copy on the front and back
covers and the sheet insertions. Chapter pages are always copied on.
IMPORTANT
•
When the machine is operating in the Cover/Sheet Insertion mode, you cannot use the
Group, Offset Group, Rotate Collating, Rotate Grouping, Saddle Stitch, Book 2-Sided,
Two-Page Separation, Image Combination, Image Separation, Booklet, Transparency
Interleaving, Image Repeat, Mirror Image, or Form Composition modes.
•
If you use the Different Size Originals mode with the Auto Paper Selection mode, you
cannot select the Cover/Sheet Insertion mode.
•
If you use the Cover/Sheet Insertion mode with the Remote or Cascade Copy mode,
Auto Orientation is not performed.
•
When the Finisher-J1 (optional) is attached, you cannot staple more than 30 sheets (LTR
or LTRR), 20 sheets (LGL), or 15 sheets (11" x 17") of output paper, including sheet
insertions.
•
When the Saddle Finisher-G1 (optional) is attached, you cannot staple more than 50
sheets (LTR or LTRR), or 25 sheets (11" x 17" or LGL) of output paper, including sheet
insertions.
NOTE
•
When copying on the front cover, back cover, or sheet insertions, these sheets are
included in the count of the total number of copies. If these sheets remain blank,
however, they are not included in the count of the total number of copies.
•
Chapter pages are included in the count of the total number of copies, since chapter
pages are always copied on.

Cover/Sheet Insertion

2
2-5