Copy Settings Table
The following items can be stored or set in Copy Settings from the Additional
Functions screen.
Additional Functions
Copy Settings
3
Standard Key 1, 2
Settings**
Auto Collate**
Image Orientation Priority*
Job Duration Display**
Auto Orientation
Photo Mode**
Standard Settings**
Store Remote Device**
Remote Device
Transmission Timeout**
Initialize Copy Settings**
*1 Not displayed when the Finisher-J1 is attached.
NOTE
•
An asterisk (*) indicates the default setting.
•
Two asterisks (**) indicate items that appear only when the appropriate optional
equipment is attached.
•
For instructions on how to set the modes not described in this manual, refer to the
appropriate Operation Manual listed at the beginning of this Copying Guide. (See
"Manuals for the Machine," on p. ii.)
•
The Copy Settings screen consists of a list of individual settings. Press [M] or [L] to
scroll to the desired setting.
3-2
Copy Settings Table
Available Settings
All modes (No settings*)
On*/Off
1
On/Off*
On/Off*
On*/Off
On/Off*
Store, Initialize
Store (Max 7 printers), Details, Erase, Move To
Top
5 to 30 sec., 30 sec.*
Initialize
Applicable Page
p. 3-3
p. 3-6
p. 3-8
p. 3-10
p. 3-12
p. 3-14
p. 3-16
p. 3-21
p. 3-27
p. 3-29