Initializing The Standard Settings - Canon imageCLASS 2220 Copying Manual

3
5

Initializing the Standard Settings

1
2
3-18 Changing the Current Standard Settings
The settings displayed are the currently set copy settings. Press [M] or [L] to
display other copy settings that do not fit in the display area.
Press [No], if you do not want to store the displayed settings as the Standard
Settings.
The settings currently displayed are stored as the Standard Settings.
The message <Stored in memory.> appears for approximately two seconds on the
touch panel display.
Press [Done] repeatedly until the Copy Basic Features screen
appears.
(Additional Functions) © [Copy Settings].
Press
Press [M] or [L] until [Standard Settings] appears © press
[Standard Settings].