G If you select an empty memory key (no settings have been stored):
❑
Press [Yes], when the confirmation message appears asking you to store the
settings.
Press [No], if you do not want to store the settings.
When storing is complete, the message <Stored in memory.> appears for
approximately two seconds on the touch panel display.
The memory key storing the copy settings is highlighted, and the stored
settings are displayed.
G If you select an occupied memory key (settings have been stored):
❑
Press [Yes], when the confirmation message appears asking you to overwrite
the previous settings.
Press [No], if you do not want to overwrite the previous settings.
When storing is complete, the message <Stored in memory.> appears for
approximately two seconds on the touch panel display.
The stored settings are displayed.
Storing/Recalling Frequently Used Copy Settings (Mode Memory)
2
2-63