Paper Feed Clutch Solenoid Removal - Lexmark 4500-00 Series Service Manual

4500

Paper feed clutch solenoid removal

1. Remove the front cover. See
more information.
2. Remove top cover. See
information.
3. Remove rear auto sheet feed cover. See
(ASF) assembly removal" on page 4-5
4. Remove right side cover. See
for more information.
5. Remove controller card cage. See
removal" on page 4-7
6. Disconnect the drive motor cable.
7. Remove optional Tray 2 connector from bracket.
8. Remove the four main drive gear assembly screws.
9. Remove the main drive gear assembly with drive motor from
printer.
10. Depress paper feed solenoid locking tab and slide paper feed
solenoid off D–roll assembly shaft.
11. Remove the toner cartridge.
12. Tilt the printer carefully to the rear so it is resting on the ASF.
13. Remove the four bottom cover screws.
14. Disconnect paper feed clutch solenoid cable from engine card
(E320/E322 only). Extract the cable for all models.
15. Remove the paper feed clutch solenoid.
4-12
Service Manual
"Front cover" on page 4-4
"Top cover" on page 4-4
"Right side cover" on page 4-5
"Controller card cage
for more information.
for more
"Auto sheet feed
for more information.
for