Clear Spantree Bridgeprioritymode - Enterasys N Standalone (NSA) Series Configuration Manual

6.2.1.23

clear spantree bridgeprioritymode

Use this command to reset the Spanning Tree bridge priority mode to the default setting of 802.1t.
clear spantree bridgeprioritymode
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to reset the bridge priority mode to 802.1t:
Matrix(rw)->clear spantree bridgeprioritymode
Spanning Tree Configuration Command Set
Configuring Spanning Tree Bridge Parameters
Matrix NSA Series Configuration Guide 6-35