Table of Contents
Advertisement
802.1Q VLAN Static Table Configuration
Use this screen to create a new VLAN or modify the settings for an
existing VLAN. You can add/delete port members for a VLAN, or prevent
a port from being automatically added to a VLAN via the GVRP protocol.
(Also, note that all ports can only belong to one untagged VLAN. This is
set to VLAN 1 by default, but can be changed via the Port Assignment
VLAN Configuration screen on page 51.)
Use <TAB> or arrow keys to move, other keys to make changes.
Figure 2-38. 802.1Q VLAN Static Table Configuration
Parameter
VID
VLAN Name
Status
Egress Ports
Forbidden Egress
Ports
Untagged Ports
[Show]
[More]
[New]
9033640
Vertical Horizon Local Management -- VH-8G
1Q VLAN Static Table Configuration
VID
VLAN Name
--------------------------------------
1
Egress Ports
11111111
Untagged Ports
11111111
<APPLY>
<Enter> to select.
Description
The ID for the VLAN currently displayed.
Range: 1-2048
A user-specified symbolic name for this VLAN.
String length: Up to 8 alphanumeric characters
Sets the current editing status for this VLAN as:
Not in Service, Destroy, or Active.
Set the entry for any port in this field to "1" to add it to the
displayed VLAN, or "0" to remove it from the VLAN.
Prevents a port from being automatically added to this VLAN via
GVRP.
Set the entry for any port in this field to "1" to add it to the
displayed VLAN as an untagged port.
Displays settings for the specified VLAN.
Displays consecutively numbered VLANs.
Sets up the screen for configuring a new VLAN.
Status
Active
Forbidden Egress Ports
00000000
VID : 1
[Show]
[More]
[New]
<OK>
<CANCEL>
VH-8G User Interface 49
Advertisement
Table of Contents
