Using The Smtp Authentication - Konica Minolta bizhub C754 User Manual

7.1 Configuring the Scan to E-mail environment
Settings
[Validity Period]
[CN]
[Key Usage]
[Chain]
[Expiration Date Con-
firmation]
d
Reference
In the administrator mode, select [Security] - [Certificate Verification Settings], then configure whether to ver-
ify the certificate. The certificate is verified by default. For details, refer to page 13-9.

Using the SMTP authentication

Configure the setting if your environment requires the SMTP authentication for sending an E-mail.
If the SMTP authentication is used, the user ID and password is sent from this machine when sending an E-
mail to perform authentication.
To use the SMTP authentication, enable the SMTP authentication on this machine. In addition, enter infor-
mation required for authentication.
In the administrator mode, select [Network] - [E-mail Setting] - [E-mail TX (SMTP)], and configure the following
settings.
bizhub C754/C654
Description
Confirm whether the certificate is still valid.
[Confirm] is specified by default.
Confirm whether CN (Common Name) of the certificate matches the server
address.
[Do Not Confirm] is specified by default.
Confirm whether the certificate is used according to the intended purpose
approved by the certificate issuer.
[Do Not Confirm] is specified by default.
Confirm whether there is a problem in the certificate chain (certificate path).
The chain is validated by referencing the external certificates managed on
this machine.
[Do Not Confirm] is specified by default.
Confirm whether the certificate has expired.
Confirm for expiration of the certificate in the following order.
• OCSP (Online Certificate Status Protocol) service
• CRL (Certificate Revocation List)
[Do Not Confirm] is specified by default.
7
7-6