9.5
Specifying fax report print conditions
9.5
Specifying fax report print conditions
Specify the conditions for printing fax-related reports. There are some reports automatically printed and oth-
ers to be printed manually.
In the administrator mode, select [Fax Settings] - [Report Settings], then configure the following settings.
Settings
[Activity Report]
[TX Result Report]
[Sequential TX Report]
[Timer Reservation TX
Report]
[Confidential Rx Report]
[Bulletin TX Report]
bizhub C754/C654
Description
Select whether to print a report containing results of faxes sent and received.
To print it, select when to print it.
•
[OFF]: Does not print an activity report.
•
[Daily]: Prints an activity report at a specified time you entered at [Output
Time Settings] every day.
•
[Every 100 Comm.]: Prints an activity report every 100 communications.
•
[100/Daily]: Prints an activity report at a specified time you entered at
[Output Time Settings] every day. In addition, a report is printed every 100
communications.
[Every 100 Comm.] is specified by default.
Select when to print a report containing the results of fax transmission.
•
[Always]: The report is printed every time a fax has been transmitted.
•
[If TX Fails]: The report is printed if a fax transmission has failed.
•
[OFF]: The report is not printed.
[If TX Fails] is specified by default.
Select whether to print a report containing results of faxes sent by polling and
broadcast.
[ON] is selected by default.
Select whether to print a report when transmission is reserved using the Tim-
er TX function.
[ON] is selected by default.
Select whether to print a report containing the results of confidential faxes
received.
[ON] is selected by default.
Select whether to print a report containing records of faxes registered with
the bulletin for being received by polling.
[ON] is selected by default.
9
9-20